Address:  26 Earl Street

Cambridge

CB1 1 JR UK

Tel: +441223 353076

Mobile: +447710 037 127

Email: acm@metaxas-associates.com

                                                                                                                                                            www.metaxas-associates.com

University Address: St John’s College

Cambridge, England, UK

Tel: +441223 338646

E-mail:acm33@cam.ac.uk

January 2010                                                                     

____________________________________________________________________

Curriculum Vitae for Dr A C Metaxas

B.Sc., M.A., PhD., D.I.C., C.Eng., F.I.E.T.                                     

____________________________________________________________________

Current position

                                    Life Fellow, St John’s College, Cambridge, UK.

Honorary President and Founder member of AMPERE (Association of Microwave Power in Europe for Education and Research), a European based organisation which is devoted to the promotion of radio frequency (RF) and microwave energy in industry, commerce and in the domestic field. Dr Metaxas was President from 1995-2005.

Founder and Director, AC Metaxas and Associates, Cambridge

 

Personal details

Date and p.o.b             4 September 1942, Cairo, Egypt

Nationality:                   British

Status:                          Married in 1968 to Margaret (nee Bilsland)

Childern:                       Nemone (born 3/11/1972)-currently BBC radio presenter

Hobbies:                       Current affairs, reading (especially biographies), writing, theatre, woodwork, golf, amateur investor           

Languages:                   Fluent in English, Greek, and French with some knowledge of German

Education

1966                            Imperial College, University of London: DIC

1965-68                       Imperial College, University of London: PhD in Gaseous Electronics. Thesis title: "Two stage ionisation phenomena in radio frequency discharges".

1962-65                       University of London: BSc (Hons) (2:1) in Electrical Engineering.

1960-61                       Taken “A” Levels for admission to London University

1952-60                       Averoff Gymnasium Grammar School, Alexandria, Egypt

1950-52                       Davarakios School, Alexandria, Egypt 

1947-50                       Ambetios School, Cairo, Egypt

                       

Career path

2009-                           Council Member, St John’s College, Cambridge, UK

2007                            Life Fellow, St John’s College, Cambridge, UK

2002-2009                   Research Fellow, St John’s College, Cambridge, UK

1995-2009                   Tutor for Natural Sciences, St John's College, Cambridge, UK 

1990-2002                   TXU-Eastern Energy plc, Ipswich, UK: Senior Engineer seconded to Cambridge University where he founded the EUG (Electricity Utilisation Group) researching into RF and Microwave heating systems

1991-95                       St John's College Cambridge: Director of Studies, Engineering for first and second year students

1987                                                        Elected Fellow at St John's College, Cambridge

1982-90                       Electricity Council, Millbank, London: seconded to University of Cambridge as Teaching Fellow

1972-82                       Electricity Council Research Centre, Capenhurst (now called C-Tech Innovation): Research Officer in the Electro-physics group, specialising in the design and testing of radio frequency and microwave heating equipment for industry.

1968-72                       University College of Swansea, University of Wales: Post-Doctoral Fellow sponsored by the UKAEA, working                                                        on new diagnostic techniques for sampling particle impurity emissions from the inner walls of thermonuclear reactors

1961-62                       Laboratory Assistant, DAVU Electrical Cables, Abbey Wood, London

           

Professional activities

2007                       Invited to be a member of the advisory of GCMEA (Global   Congress on Microwave Energy Applications) to be held in Japan in August 2008
2007-present          Member of the editorial board of IET Science, Measurement   & Technology

2002-present          Director of AC Metaxas and Associates

1998-2005             Governor of Stanford Endowed Schools as a nominee of St John’s College, Cambridge.

1996                       Transferred to a Fellowship of the IEE now IET

1995                       Chairman of Microwave and High Frequency Heating Conference, St John's College, Cambridge September 1995

1995-2005             President of AMPERE (Association for Microwave Power for Research and Education in Europe) Association

1994-1996             Chairman of BNCE's Education and Training Committee and member of the Main Committee of BNCE (British National Committee for Electroheat)

1994-present          Editor of AMPERE Newsletter

1993-present          Co-founder of AMPERE, member of the Management Committee of AMPERE

1990                      Awarded an MA from the University of Cambridge

1990-present          Member of the Institute of Energy

1989-1990             Refereed EPSRC, National Sciences and Engineering Research Council of Canada and Australian National Council proposals                                                   for research grants.

1988-89                 Expert Witness in the London High Court on a RF energy application in an industrial dispute involving a fire

1988-92                 External Examiner for final year Electrical Engineering Course at North East London Polytechnic

1988-94                 Editor of BNCE's Education and Training Newsletter

1987-2000             Associate Editor of the Journal of Microwave Power and Electromagnetic Energy

1986-95                 Member of the IEE

1986                       Host of 1st biennial International Conference on Microwave and High Frequency Heating at St John’s College which subsequently became AMPERE venues from 1993 up to the present

1985                       Member of the organising committee for the Universities Power Engineering Conference

1984-94                 Member of the Education and Training Committee of British National Committee of Electroheat (BNCE)

1984 and 1986       Co-director of the Cambridge Energy Summer School

 

Invited Lectures and keynote presentations

AMPERE               Presented a review on industrial applications in the short course preceding the conference in Karlsruhe in Sept 2009 

AMPERE               Presented two invited plenary talks in Oradea, Romania at the 11 AMPERE conference on “A review of industrial applications of RF and microwaves pointing to future trends” and also on a SWOT analysis of the industry. Further he presented a review on industrial applications in the short course preceding the conference Sept 2007 

CCFRA, UK          Invited talk on “Hot spots in the microwave field” at the Campden and Chorleywood Food Research Association Seminar 23 Nov 2006

EMMA Club, UK   Invited to present a paper on “Dielectric measurements: the key to successful exploitation of microwave processing, University of Nottingham, organised by the National Physical laboratory, 23 June 2006

AMPERE               President’s stepping down speech after 10 years at the helm at the AMPERE conference in Modena, Italy, Sept 2005

MedPow04            Invited paper at the MedPow04 conference, Limassol, Cyprus Nov 2004

Takamatsu, Japan   Invited paper at the International Symposium on Microwave Science and its Application to Related Fields, July 2004

University of Padua Invited paper at the Heating with Internal Sources (HIS-01) Conference, Padua, Italy, September 2001

PIERS     (Progress in Electromagnetic Research Symposium), Invited paper at the PIERS Conference Osaka, Japan, July 2001

AMPERE               President’s welcoming address at the 2nd International AMPERE conference on Microwaves and Chemistry, Juan les Pins, Antibes,     September 2000

AMPERE               Keynote address at the 7th International AMPERE conference on Microwave and High Frequency Heating, Valencia, Spain, September 1999

AMPERE               Plenary review paper on drying at the Microwaves in Chemistry conference, Prague, September 1998

GOTEBURG UNIV              Invited IEEE lecture at the University, Sweden May 1998

OPTIM98              Plenary lecture on the Unification of Electroheat as an academic discipline, Brasov, Romania, May 1998

AMPERE               Keynote address on the unified approach to teaching electroheat, Fermo, Italy, September 1997

PIERS                    Invited talk on computational electromagnetics for microwave heating, Boston, USA, July 1997

WORLD CONGR  Microwave Processing, invited lecture on recent developments of radio frequency technology and to chair a Round Table Discussion, Orlando, Florida, January 1997

MICROWAVE Asso. Conference at the Food RA, Leatherhead, UK, Invited talk on the potential of microwave heating in the food industry, October 1996,

RMIT                     (Royal Melbourne Institute of Technology), invited to present a short course on rf and microwave heating, Melbourne Australia, 1996 

ENSEEIHT            (Ecole National Superieure d'Electrotechnique d'Electronique d'Information et de Hydraulique de Toulouse) Participated in a Round Table Discussion about Technology Transfer Toulouse, France, October 1995

AChemS                 (American Chemical Society) spring meeting at Anaheim, LA, USA, invited paper on microwaves and polymers April 1995

MRS       (Materials Research Society) spring meeting in San Francisco, USA, invited paper on overview of the electroheat activities at Cambridge University, March 1994

ACerS                    (American Ceramics Society) Spring meeting in Cincinnati, USA, review paper on microwave heating, March 1993,

PRETORIA UNIV Invited to present a lecture on Electroheat, July 1993

DEEKIN UNIV     Invited to present a paper on microwave theory, practice and a review of industrial applications, Melbourne Australia, 1990

ENSEEIHT            Presented a series of lectures at the Ecole National on nuclear power, industrial lasers, electroheat-a unified approach and a historical perspective of Cambridge through science at Toulouse, France, October 1989

KEMA                   High frequency and microwave heating and processing closing address at the International Conference, Arnhem, 1989

SBMO                   International Microwave Conference, on the future of microwave applications, Sao Paolo, Brasil, 1989

ALBERTA UNIV   Invited lecture on teaching electroheat through a unified approach Alberta, Canada, 1988

CNRS                    (Centre National de Research Scientifique), Invited to present a keynote address on industrial microwave applications, Paris 1987

 

International Conference

                               Organised, hosted and acted as Chairman of the Fifth AMPERE Microwave and High Frequency Processing Conference at       St John's College, Cambridge, 17-21 September 1995, for over 200 delegates. Supervised the organisation of the next 6 AMPERE conferences in the series while Dr Metaxas was President.

Published Books

       'Foundations of Electroheat-A Unified Approach', J. Wiley and Sons, 1996

                               ‘Industrial Microwave Heating' Peter Peregrinus, IEE, 1983 (reprinted 1988 and 1993), co-authored with Mr R. Meredith

                                             

Courses and special lectures

2000-present          Biennial short course on RF and microwave heating given under the auspices of AC Metaxas and Associates

1993                       Lecture tour of Belgium Universities (Brussels, Ghent, Leuven and Liege) on Electroheat topics

1993                       University of Pretoria, on RF and microwave heating and conducted a case study on drying

1992-1999             EUG short courses on RF and microwave heating

1991-1998             Amsterdam, Holland, under the auspices of the Centre Professional Advancement, New Jersey, USA on RF and                                                                            microwave heating

1990 and 1996       Melbourne, South Australia under the auspices of the University of Deekin, Geelong and RMIT on RF and microwave heating

1990 and 1991       Electroheat to MSc course students at the University of Southampton

1990-1994             Cranfield University to Thermal Energy Processes MSc students on RF, microwaves and plasmas

1990-1998             University of Aston to 4th year undegraduates on the unified approach to electromagnetic heating

1989-1999             University of Kingston on electroheat to MSc students on Advanced Manufacturing Systems on the Electro-Manufacturing Systems Module. Also conducted an industrial case study on drying

1988-1994             Various venues to industrialists under the auspices of BNCE on electroheat topics

 

Honours and Awards 

The organisers of the Global Conference on Microwave Energy Applications (GCMEA) held in Japan in August 2008 announced the formation of the 
 
                                GCMEA 2008 Ricky Metaxas Pioneer Award 
 
In 2008 this was awarded to Dr Lambert Feher of Institut für Hochleistungsimpuls- und Mikrowellentechnik for his paper entitled:

 

“The Quamtum Nature of Microwave Heating, Processing and Effects in Discussion with Classical Electrodynamics”, presented at the GCMEA Conference. This award will be awarded in subsequent World congresses in the series.

 

Elected member of the Academy of Sciences in Bologna in 2002

 

Awarded jointly with GE Georghiou, R Meredith and D Gurwicz the "Outstanding Paper Award" by the International Microwave Power Institute for the paper on 'Switch mode Power Supply for Microwave Heating based on the Boucherot Effect' for the most significant and technical contribution published in the Journal of Microwave Power in 1999

 

Awarded, jointly with Regas Neophytou, for the session 1996/1997 the IEE Science, Education and Technology Divisional Premium for the paper entitled, ‘Characterisation of radio frequency heating systems in industry using a network analyser’ 

 

Awarded the 1992 POWERGEN PRIZE for innovation and development in education offered by the Partnership Trust in London, for the design and installation of an electric heat pump drying plant. This award encourages development in teaching which abolishes any misleading images, employs the best of the new methods or approaches in teaching or learning and sets an example to other subjects in Higher Education          

 

                                   Awarded the "Outstanding Paper Award" by the International Microwave Power Institute for the paper on 'Network                                    Analysis on Radio Frequency Prototype Industrial Applicators' published in the Journal of Microwave Power in 1985

                         

List of publications by

Dr A C Metaxas and colleagues

 

Electricity Council Research Centre internal publications (now C-Tech Innovation) Capenhurst Chester

ECRC/R594 'Dielectric Properties of Three Waxes Used in Investment Casting', April 1973

ECRC/M680 'Design of a Resonant Cavity as a Heating Device at 2.45 GHz', December 1973

ECRC/M767 'Design of a TM010 Resonant Cavity to Process Liquid Foodstuffs at 896 MHz', September 1974

ECRC/M609 'Effects of Real and Imaginary parts of the Dielectric constant and Material Size on the Performance of a Microwave Oven" April 1973

ECRC/M557 'The Complex Dielectric Constant of Moist Paper and Board in the Microwave Region', July 1973, co-authored with I M Parker

ECRC/877 'Microwave Dye Fixation (I): Design of Equipment', December 1976

ECRC/921 'Design of Equipment for Microwave Sterilisation of Food Particles', July 1976

ECRC/M1055 'Electrical Characterisation of Aperture Coupled Resonant Cavities Used in Microwave Heating', June 1977

ECRC/R1123 'Microwave Dye Fixation(2): Dye Fixation Tests', February 1978

ECRC/R1184 'Microwave Drying of Nylon Tufted Carpets', October 1978

ECRC/R1225 'Final Drying of Tufted Carpets Held on a Stenter with Microwaves', March 1979

ECRC/1354 'Electrical Methods for Heating/Curing of Carpet Backings', August 1980

ECRC/N1437 'Industrial Microwave Heating-The Past, Present and Future Trends', 1981                       

ECRC/N150 'Electrical Techniques In Biotechnology', October 1981

ECRC/N1561 'Microwave Applications on the Food Industry', April 1982

 

Refereed and conference publications

'The Influence of Metastable Atoms and Molecules on the Re-ignition of High Frequency Discharges', J. Appl. Phys., 5, pp.1077-1089, 1972, co-authored with J.R.Cozens.
'Design of a TM010 Resonant Cavity as a Heating Device at  2.45 GHz', J. Microwave Power, (9)2, pp.13-  , 1974.

'A Comparison of the Dielectric Properties of Paper and Board at Microwave and Radio Frequencies', J. Microwave Power, 9(2), pp. 79-89, 1974, co-authored with J. Driscoll.

'Properties of Materials at Microwave Frequencies', Transaction of the International Microwave Power Institute, 2, 1974.

'Design of a Resonant Cavity as a Heating Device at 896 MHz and 2.45 GHz', Microwave 74 Proceedings, Montreux, September, 1974.

'Rapid Heating of Liquid Foodstuffs at 896 MHz.', J. Microwave Power, 11(2), pp.105-115, 1976.

'Improved Dye Fixation of Carpet Yarns Using a Fundamental Mode Resonant Cavity at 2.45 GHz',  Proceedings, IMPI Symposium, Leuven, Belgium, 1976, co-authored with D Evans and N Catlow.

'Microwave Drying of Nylon Tufted Carpets-I Dielectric Properties and Q Measurements' Proceedings IMPI Conference, Ottawa, June 1978, co-authored with A. Gohel.

'Microwave Drying of Nylon Tufted Carpets-II Electrical Characterisation of a Modified TE1on Resonant Cavity', J. Microwave Power,  13(4), pp.315-320, 1978, co-authored with R Meredith.

'Microwave Assisted Dye Fixation', J. Microwave Power, 13(4), pp.341-350, 1978, co-authored with D Evans and N Catlow.

'Microwave Drying of Nylon Tufted Carpets - III Field Trials', J. Microwave Power,14(4), pp.367-382, 1979, co-authored with I. Holme of Dept. of Textile Industries, Leeds University.

'Boost Your Shift Production With Microwaves', Carpet Review Weekly, July 19, p30, 1979, co-authored with R. Meredith. and I. Holme.

'A Twin TE1on Cavity System for Microwave Drying of Printed Carpets', IEE-Techniques & Applications of Microwave Power, November 1979.

'Radio Frequency and Microwave Techniques in the Manufacturing Industry', Speciality Chemicals,1, pp.27-30, February 1981.

'The Future of Electrical Techniques in the Production of Printed Tufted Carpets', J. Microwave Power, 16 (1), pp.43-55, April 1981.

'Electrical Optimisation of Radio Frequency Applicators', UPEC, Conference Proceedings, April 1982.

'A Unified Approach to the Teaching of Electromagnetic Heating of Industrial Materials', Int. J. Elect. Enging. Educ., 22, pp.101-118, 1985.

'Network Analysis on Radio Frequency Prototype Industrial Applicators', J. Micr. Power, 20(4), pp.195-216, 1985.

Editor, for a special issue on radio frequency industrial applications published in the Journal of Microwave Power, 22, Number 3, pp. 120-153, 1987.

'RF and Microwave Energy Hots Up', IEE Review, pp.185-187, May 1988.

Editor, BNCE, Electroheat Education Newsletter, Millbank, London, July 1988.

'Electricity in Industry-Motive Power to Process Heat', Energy Efficiency School, Manweb Electricity, Chester , September 1988.

'Case Study on Drying Involving Electroheat Options', J.Microwave Power, 23(4), pp.203-210, 1988, co-authored with P L Jones.

'Radio Frequency and Microwave Heating I. Principles and Practice', II Industrial Applications, III Case Study, Proceedings Electricity Utilisation Course, Eastern Electricity-JF Consultants, February 1989.

Editor, BNCE, Electroheat Education Newsletter, No.11, Millbank, London, April 1989.

'Heating with Electromagnetic Fields - A Unified Approach', Electricity Council Teaching Monograph, Elecricity Council, Millbank, London, September 1989.

Editor, BNCE, Electroheat Education Newsletter, No.12, Millbank, London, September 1989.

'Rapid Microwave Feasibility Tests Using a TE1on Cavity", Proceedings High frequency and microwave processing and heating conference, KEMA/UIE, Arnhem, September 1989; also in Mikrowellen & HF Magazin, 15, No.8, pp.646-647, December 1990.

'Heating Metallic and Dielectric Slabs by Electric Fields', Electromagnetic Energy Reviews, 2(4), pp.33-38, 1989.

'High Frequency/Microwave Conference at Arnhem `89 - A personal Viewpoint' J. Microwave Power and Electromagnetic Energy, 24 No.4, pp.247-249, 1989.

'Undergraduate Teaching in Electroheat', Power Engineering Journal, 4(1), pp. 45-50, January 1990

 Editor, BNCE, Electroheat Education Newsletter, No.13, Millbank, London, January 1990.

'Rapid Feasibility Tests Using a TE10n Variable Aperture Resonant Applicator, J. Microwave Power and Electromagnetic Energy, 25(1), pp.3-11, 1990.

'A versatile Microwave Heating Resonant Cavity: Effects of temperature variation on cavity matching and tuning', Proceedings of IEE Seminar on Industrial Uses of Microwaves, June 1990 and Conference Proceedings of Industrial Microwave Processing, University of Deakin, Geelong, South Australia, July 1990.

'Energy Education in the 1990's', Proceedings Australian Institute of Energy Conference, Adelaide, July 1990.

'Introduction to High Frequency Electric Drying Processes', Proceedings of BNCE Summer School, North Frith, September 1990.

'Electro-production Know-How', Proceedings IEE Seminar on Production Efficiency and Profit, East Midlands Electricity Training Centre, Nottingham, November 1990.

Editor, BNCE, Electroheat Education Newsletter, No.14, Millbank, London, November 1990.

'Microwave', McGraw-Hill Yearbook of Science and Technology, pp. 237-239, 1991.

'Electroheat Education', Energy World, No.184, January 1991.

'Microwave Processing of Ceramics', a Chapter in Advanced Ceramic Processing and Technology,  Noyes Publications, 1991, co-authored with Dr J. Binner.

Editor, BNCE, Electroheat Education Newsletter, No.15, Millbank, London, November 1990.

Principles of Microwave Heating, Proceedings of  a  Seminar on microwaves and ceramics, MaMP/TWI, London, April 1991.

Editor, BNCE, Electroheat Education Newsletter, No.15, Millbank, London, May 1991.

Consolidate, Educate and Ride the Recessional Storm, Guest Editorial, J. Microwave Power and Electromagnetic Energy, 26(3), pp.125-126, 1991.

'Microwave Heating - a tutorial', Power Engineering Journal, 5, No.5, pp.237-247, September 1991.

Simplified of Microwave Heating Applicators and Heating Cavities, Chapter 5 of a course book, entitled 'Microwave and high frequency', Volume I, pp.300-328, as part of the international conference on High frequency and microwave processing and heating, Nice, 8-10 October 1991.

Microwave Heating of Substrate Catalyst Material, Proceedings High frequency and microwave processing and heating conference, Nice, 8-10 October 1991, co-authored with N Collings and T Ma.

Editor, BNCE, Electroheat Education Newsletter, No.16, Millbank, London, December 1991.

'Electroheat and the Ionised state',  a tutorial', IEE, Power Engineering Journal, (6) No.3, pp.139-147, 1992.

Editor, BNCE, Electroheat Education Newsletter, No.17, Millbank, London, September 1992.

'A laboratory Heat Pump', BNCE Proceedings of Summer School on Heat Pumps: theory and application, Whittington Hall, Midlands Training Centre, September 1992.

'A Mathematical Derivation of the Power Penetration Depth for thin Lossy Materials', J. Microwave Power and Electromagnetic Energy, 27, No.4, pp.217-222, 1992, co-authored with W. Fu.

Editor, BNCE, Electroheat Education Newsletter, No.18, Millbank, London, February 1993.

'Coupling and Matching of Radio Frequency Industrial Applicators', a tutorial', IEE, Power Engineering Journal, (7) No.2, April issue, pp.85-93, 1993, co-authored with M C Clee.

'Applicators for Industrial Microwave Processing', American Ceramics Ceramics Conference on Microwaves: Theory and applications in Materials processing III, Ceramic Transactions, 36, pp.549-562, 18-22 April, Cincinnati, Ohio, 1993.

'MAXEMOL - A Numerical Scheme for the Solution of Maxwell's Equations using the Method of Lines',  Proceedings,  Fourth International Conference on Microwave and High Frequency, Goteborg, Sweden, 28-30 September (1993), co-authored with W B Fu.

'Localised Overheating and High Frequency Arcing in Latex Foams', Proceedings, Fourth International Conference on Microwave and High Frequency, Goteborg, Sweden, 28-30 September (1993), co-authored with M C Clee.

'Stability Criteria for MAXEMOL - A Numerical Scheme for Maxwell's Equations Using the Method of Lines', Proceedings, Fourth International Workshop on Discrete Time Domain Modelling of Electromagnetic Fields and Networks, Berlin,  Germany,  28-30 October (1993), co-authored with W B Fu.

Editor, AMPERE, Newsletter, No.1, EUG, CUED, January 1994.

Editor, BNCE, Electroheat Education Newsletter, No.19, Millbank, London, February 1994.

'Numerical Models for the Sintering of Ceramics in a Multi-Mode Cavity', Proceedings, Symposium on Microwave Processing of Materials, Materials Research Society, San Francisco, USA, 4-6 April 1994, co-authored with W B Fu and D C Dibben.

Overview of the EUG Activities at the University of Cambridge, in Microwave Processing of Materials IV, Mat. Res. Soc. Symp. Proc. 347, pp.19-30, 1994.

Numerical Prediction of Three-Dimensional Temperature Distributions Inside a Microwave Oven Using the Method of Lines, Proceedings, International Conference on Computation in Electromagnetics, Nottingham University, UK, 12-14 April 1994, co-authored with W B Fu.

Experimental Verification of a Finite Element Solution to Heating Problems in a Multi-Mode Cavity, Proceedings,  International Conference on Computation in Electromagnetics,  Nottingham University, UK, 12-14 April 1994, co-authored with D C Dibben.

Editor, AMPERE, Newsletter, EUG, CUED, No.2, May 1994.

'Finite Element Analysis of Multimode Cavities With Coupled Electrical and Thermal Fields', Proceedings IMPI  Symposium, Chicago, August, 1994, co-authored with D Dibben.

'Numerical Prediction of Three-Dimensional Power Density Distributions in a Multi-Mode Cavity', Journal of Microwave Power and Electromagnetic Energy, 29(2), pp.67-75, 1994, co-authored with W B Fu.

'An Investigation Into Radio Frequency Arcing in Latex Foams', Journal of Microwave Power and Electromagnetic Energy, 29(2), pp.94-100, 1994, co-authored with M C Clee.

Editor, AMPERE Newsletter, No.3, EUG, CUED, October 1994.

'Radio Frequency and Microwave Processing of Wastes', IEE Colloquium, November 1994.

'Finite Element Time Domain Analysis of Multimode Applicators Using Edge Elements', Journal of Microwave Power and Electromagnetic Energy, 29(4), pp.242-251, 1994, co-authored with D C Dibben.

A Novel Arc Detecting and Suppressing System for Radio Frequency Applicators, J. Microwave Power, and Electromagnetic Energy  30(2), pp.71-80, 1995, co-authored with M C Clee.

Editor, AMPERE Newsletter, EUG, CUED, No.4, January 1995.

Radio Frequency and Microwave Heating Applicators and Their Use in Industry, Proceedings of Microwave Processing of Polymers Conference, organised by the American Chemical Society at Anaheim, Los Angeles, April 1995.

Editor, AMPERE Newsletter, No.5, EUG, CUED, April 1995.

'On the Time Domain Finite Element Analysis of Multimode Microwave Applicators', Proceedings of Compumag 95 Conference, Berlin, July 10-13,  1995, co-authored with D C Dibben.

Editor, AMPERE Newsletter, No.6, EUG, CUED, September 1995.

'Time Domain Finite Element Analysis of Multimode Microwave Applicators Loded with Low and High Loss Materials', Proceedings Fifth Microwave and High Frequency Heating conference, St John's College, Cambridge, pp. A3.1-A3.4, September 1995, co-authored with D C Dibben.

'Modelling of RF Heating', Proceedings Fifth Microwave and High Frequency Hetaing conference, St John's College, Cambridge, pp. S3.1-S3.4, September 1995, co-authored with R I Neophytou.

'A combined Radio Frequency and Heat Pump Drying System, Proceedings Fifth Microwave and High Frequency Heating conference, St John's College, Cambridge, pp. L3.1-L3.4, September 1995, co-authored with M Marshall.

'Numerical Solution of Maxwell's Equation in three Dimensions Using the Method of Lines with Applications to Microwave Heating in a Multi-Mode Cavity', International Journal Of Applied Electromagnetics and Mechanics, 6(3) pp.165-186, November 1995, co-authored with W B Fu.

Editor, AMPERE Newsletter, No.7, EUG, CUED, January 1996.

'A Comparison of the Errors Obtained with Whitney and Linear Edge Elements', Proceedings Seventh Bienniel IEEE Conference on Electromagnetic Field Computation, Okayama, Japan, March 18-20, 1996, page 100, co-authored with D C Dibben.

'Frequency Domain vs Time Domain Finite Element Methods for Calculation of the Fields in Multimode Cavities', Proceedings Seventh Bienniel IEEE Conference on Electromagnetic Field Computation, Okayama, Japan, March 18-20, 1996, p.322, co-authored with D C Dibben.

Editor, AMPERE Newsletter, No.8, EUG, CUED, May 1996.

'Time Domain Finite Element Analysis of Multimode Microwave Applicators', IEEE Transactions on Magnetics, 32(3), pp.942-945, May 1996, co-authored with D C Dibben.

The Teaching Fellowship Scheme in British Universities, Proceedings UIE conference Birmingham, June 1996, co-authored with T N Oliver.

Editor, AMPERE Newsletter, No.9, EUG, CUED, July 1996.

'Analysing Loaded Cavities Using the FETD Method', Proceedings RMIT conference Melbourne July 8-10, 1996, co-authored with D H Malan and D C Dibben.

'Electrical Circuit Modelling for a Radio Frequency Heating/Drying Sytsem', Proceedings RMIT conference, Melbourne, South Australia, July 8-10, 1996, co-authored with R Neophytou.

Editor, AMPERE Newsletter, No.10, EUG, CUED, October 1996.

'The Potential for Microwave Heating in the Food Industry', Proceedings, Microwave Association Conference, Dorking, October 3-4, 1996.

'The Art of Crystal Ball Gazing', Editorial in International Microwave Power Institutes’s Waveguide Newsletter, pp. 1-2, October 1996.

'Computer Simulation of a Radio Frequency Industrial System', Journal of Microwave Power and Electromagnetic Energy, 31(4), pp. 251-259, 1996, co-authored with R I Neophytou.

Editor, AMPERE Newsletter, No.11, EUG, CUED, December 1996.

'Recent Developments in Radio Frequency Technology, Proceedings of First World Congress of Microwave Processing, Microwaves: Theory and Application in Materials Processing IV, Ceramic Transactions 80, Walt Disney Village, Florida, pp.269-276, January 1997.

'Electrical Circuit Simulation for rf Heating Systems', Proceedings of First World Congress of Microwave Processing, Abstracts Book, pp. 97-98, Walt Disney Village, Florida, January 1997, co-authored with R Neophytou.

'Finite Element Modelling of Radio Frequency Applicators, Proceedings of First World Congress of Microwave Processing, Abstracts Book, p. 111-113, Walt Disney Village, Florida, January 1997, co-authored with R I Neophytou.

'On the Analysis of Multimode Cavities Using the FETD Method', Proceedings of First World Congress of Microwave Processing, Abstracts Book, p.133-135, Walt Disney Village, Florida, January 1997, co-authored with D H Malan and D C Dibben.

Editor, AMPERE Newsletter, No.12, EUG, CUED, March 1997.

'A Comparison of the Errors Obtained with Whitney and Linear Edge Elements', IEEE Transactions of Magnetics, 33, No 2, pp. 1524-1527, March 1997, co-authored with D C Dibben.

'Frequency Domain vs Time Domain Finite Element Methods for Calculation of the Fields in Multimode Cavities', IEEE Transactions of Magnetics, 33, No.2, pp. 1468-1471, March 1997, co-authored with D C Dibben.

Simulation of Microwave Heating Using Finite Elements, IEE Colloquium on High Frequency Simulation in Practice, Savoy Place, May 18, 1997.

Editor, AMPERE Newsletter, No.13, EUG, CUED, June 1997.

'Characterisation of Radio Frequency Heating Systems in Industry Using a Network Analyser', IEE Proceedings, Sci. Meas. Technol. 144, No.5, pp.215-222, September 1997, co-authored with R I Neophytou.

Computer Simulation and Experimental Validation of Phased Controlled Microwave Heating”, Proceedings of Microwave and High Frequency Heating 1997 AMPERE conference, Fermo, Italy, pp.23-26, September 1997, co-authored with J R Bows, M L Patrick and D C Dibben.

‘Domain Decomposition with Electromagnetic Finite Element Analysis’, Proceedings of Microwave and High Frequency Heating 1997 AMPERE conference, Fermo, Italy, pp.27-30 September 1997, co-authored with H Malan.

3D FE Combined Tank and Applicator circuit Model, Proceedings of Microwave and High Frequency Heating 1997 AMPERE conference, Fermo, Italy, pp. 429-432, September 1997, co-authored R I Neophytou.

Editor, AMPERE Newsletter, No.14, EUG, CUED, September 1997.

AMPERE Conference Draped in History, Waveguide, ISMI, 9, No.3, pp1-2, November 1997.

Editor, AMPERE Newsletter, No.15, EUG, CUED, December 1997.

Editor, AMPERE Newsletter, No.16, EUG, CUED, March 1998.

‘An Improved FE-FCT method for the Solution of coupled Field in Gas Discharge Problems’, Dicusion meeting on “Coupled Problems”, IEE, Savoy, 7 May 1998, co-authored with G Georghiou and R Morrow.

‘On the Unification of Electroheat as an Academic discipline’, Proceedings of the 6th International Conference on Optimisation of Electrical and Electronic Equipments, Brasov, May 14-15, pp. 107-110, 1998

‘Short-Gap Breakdown of Needkle point Gaps in Air Using Finite Element and Finite Differences Methods’, Proceedings of the 11th Symposium of Elementary Processes and Chemical Reactions in Low Temperature plasmas, pp. 65-70, Slovakia, 22-26 June 1998, co-authored with G Georghiou and R Morrow.

‘Combined Eigenvalue and Circuit Modelling of radio frequency Heating System’, Abstract in Proceedings of Progress in Electromagnetics Research Symposium 13-27 July Nantes France, session MO6 p.462 co-authored with R I Neophytou

‘Domain Decomposition with finite Elements for microwave Heating’, Abstract in Proceedings of Progress in Electromagnetics Research Symposium 13-27 July Nantes France, session CO5 p.601, co-authored with H Malan

‘Improved FE-FCT Method for the Solution of Gas Discharge Problems’, Abstract in Proceedings of Progress in Electromagnetics Research Symposium 13-27 July Nantes France, session DO7 p.885 co-authored with G Georghiou and R Morrow

Editor, AMPERE Newsletter, No.17, EUG, CUED, July 1998.

‘A novel radio frequency assisted heat pump dryer’, Proceedings of the 11th International Drying Symposium (IDS’98), Halkidiki, Greece August 19-22, vol C, pp. 1967-1974, co-authored with MG Marshall.

‘Improved Finite Element Flux Corrected Transport(FE-FCT) Method for Gas Discharge Problems. Application to short needle Point-Plane Gaps’, Proceeding of HAKONEY (VI) International Symposium of High Pressure Low temperature Plasma Chemistry, pp.128-132, Ireland, 31 August to 2 September 1998 co-authored with G Georghiou and R Morrow.

‘Domain Decomposition and Parallel Processing in Microwave Applicator Design’, Proceedings of 11 Conference on Domain Decomposition, University of Greenwich, July 1998, co-authored with H Malan

“Radio Frequency and Microwave drying: A Review’, Proceedings of the International Conference on Microwave Chemistry, Prague, pp. 107-110, September 6-11, 1998.

‘Modeling of the Radio Frequency Electric Field Strength Developed during the RF Assisted Heat Pump Drying of Particulates’, Journal of Microwave Power and Electromagnetic Energy, 33(3), pp. 167-177, 1998, co-authored with M.G.Marshall.

‘Combined 3D FE and Circuit Modelling for Radio Frequency Heating Systems’, Journal of Microwave Power and Electromagnetic Energy, 33 Number 4, pp. 243-262, 1998, co-authored with R I Neophytou.

Editor, AMPERE Newsletter, No.19, EUG, CUED, January 1999.

‘An improved Finite Element-Flux Corrected Transport Algorithm’, Journal of Computational Physics, 148, pp.605-620, 1999, co-authored with G Georghiou and R Morrow

‘Radio Frequency Assisted Heat Pump Drying of Crushed Brick’, Applied Thermal Engineering, 19, pp. 375-388, 1999 co-authored with M G Marshall.

‘The theory of Short-Gap Breakdown of Needle Point-Plane Gaps in Air Using Finite Difference and Finite Element Methods’, Journal Physics D: Applied Physics, Vol 32, pp.1370-1385, 1999,  co-authored with G Georghiou and R Morrow.

‘Investigation of the Harmonic Generation in Conventional Radio Frequency Heating Systems’, Journal of Microwave Power and Electromagnetic Energy, 34 Number 2, pp.84-96, 1999 co-authored with R I Neophytou.

Editor, AMPERE Newsletter, No.20, EUG, CUED, April 1999.

‘Characterisation of corona in air at radio frequency using the FE-FCT method’, Journal Physics D: Applied Physics, 32, pp. 2204-2218, co-authored with G E Georghiou and R Morrow.

Editor, AMPERE Newsletter, No.21, EUG, CUED, July 1999.

Modelling of Microwave Applicators by the use of a Fully Explicit Whitney Element Time Domain Scheme’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with A Hallac.

FE Eigenvalue Simulation of Radio Frequency Heating Systems’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with R I Neophytou.

‘Domain Decomposition Preconditioning for Finite Element Microwave Heating’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with D H Malan.

‘Inclusion of Wall Losses in the Numerical Simulation of Microwave Heating Problems’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with R H Ehlers.

The Pre-breakdown Characterisation of RF Systems Using Finite Elements, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with G E Georghiou.

Editor, AMPERE Newsletter, No.22, EUG, CUED, October 1999.

‘Microwave Phase Controlled Heating’ International Journal of Food Science and Technology, 34, 295-304, 1999 co-authored with J R Bows, M L Patrick, R Janes and D Dibben.

‘A Novel Radio Frequency Assisted Heat Pump Drier’, Drying Technology Journal, 17 (7&8), pp 1571-1578, 1999, co-authored M G Marshall.

Combined Tank and Applicator Design of Radio Frequency Heating Systems’, co-authored with R I Neophytou, IEE Proceedings,Microwaves, Antennas and Propagation, 146, no 5, pp.311-318, Oct 1999

‘Switch Mode Power Supply for Microwave Heating Based on the Boucherot Effect’, Journal of Microwave Power and Electromagnetic Energy, 34 Number 4, pp. 206-215, 1999, co-authored with G Georghiou, R Meredith and D Gurwicz.

 ‘Two dimensional simulation of streamers using the FE-FCT algorithm’, 

Journal Physics D: Applied Physics, 33 number 3, pp.L27-L32, 2000,  co-authored with G Georghiou and R Morrow.

The simulation of the coronal development in air at radio frequency: the effect of attachment secondary emission and diffusion, IEE Proc. Science Measurements and Technology, 147 number 2,pp. 65-73, co-authored with G E Georghiou and R Morrow.

‘Implementing a finite element time domain program in parallel’, IEEE  Antennas and Propagation Magazine, vol 42, number 1, Feb2000, co-authored with H Malan

Editor, AMPERE Newsletter, No 23, January 2000.

Editor, AMPERE Newsletter, No 24, April 2000

‘Determination of Resonant Modes of RF Heating Systems using Eigenvalue Analysis’, Journal of Microwave Power and Electromagnetic Energy, 35 Number 1, pp.3-14, 2000 co-authored with R I Neophytou

‘Radio frequency and microwave heating; a perspective for the millennium,  Power Engineering Journal, 14 No. 2 , April issue, pp.51-60, 2000.

Editor, AMPERE Newsletter, No.24, EUG, CUED, April 2000.

Editor, AMPERE Newsletter, No.25, EUG, CUED, July 2000. 

Two-Dimensional Simulation od Electron Avalanches and Streamers in Air Using the FE-FCT Method, Proceedings of International Conference on Gas Discharges and their applications, Glasgow, UK, 3-8 September 2000 co-authored with Georghiou, G. E.,  Morrow, R.

Editor, AMPERE Newsletter, No.26, EUG, CUED, Oct 2000

‘Simulation of RF coronas using the FE-FCT method’, submitted to the Journal of Microwave Power and Electromagnetic Energy, 35 Number 2, pp.151-164, 2000, co-authored with G E Georghiou.

‘The Effect of Wall Losses in the Numerical Simulation of Microwave Heating Problems’, Journal of Microwave Power and Electromagnetic Energy, 35 Number 4,

pp. 199-215, 2000 co-authored with R H Ehlers and D C Dibben.

A Two Dimensional Finite Element - Flux Corrected Transport Algorithm for the Solution of Gas Discharge Problems, J.Phys.D; Applied Phys, 33, 2000 pp. 2453-2466 co-authored with Georghiou, G. E., Morrow, R.

Editor, AMPERE Newsletter, No.27, EUG, CUED, Jan  2001

‘Designing dielectric heating equipment using numerical techniques’, Metalurgia, 68 No.4, pp.24-28, April, 2001

Editor, AMPERE Newsletter, No.28, EUG, CUED, April 2001

‘Application of the Resistive sheet in Finite Element Microwave Heating Systems, Journal of Microwave Power and Electromagnetic Energy, 36 Number 2, pp.77-87, co-authored with Ehlers, R.

‘The Effect of Photoemission on the Streamer Development and Propagation in Short

Uniform Gaps’, J.Phys.D; Applied Phys, 34, pp.200-208, 2001 co-authored with G Georghiou and R Morrow

 Editor, AMPERE Newsletter, No.29, EUG, CUED, June 2001

‘Towards a Fully Three-Dimensional Model for Gas Dicsharges on Unstructured Grids, Using

the FE-FCT Method, Proceedings of the ICGD conference, Nagoya, Japan, July 2001 co-authored with K Hallac and G Georghiou 

‘FE modelling for microwave and RF heating’. Proceedings PIERS Conference, p. 34, Cosmosquare International Education and Training, Osaka, July 18-21, Japan

‘Finite Element Modelling of Thin Films For Microwave Heating’, Proceedings of the Eight International Conference on Microwave and High Frequency Heating, Bayreuth, Germany, 3-7, September 2001 co-authored with R Ehlers

‘Higher Order Vector Finite Elements for Tetrahedral Cell and Applications to Microwave Heating, Proceedings of the Eight International Conference on Microwave and High Frequency Heating, Bayreuth, Germany, 3-7, September 2001 co-authored with K Hallac

‘Finite Elements in the Simulation of Dielectric Heating Systems’, Proceedings of the Eight International Conference on Microwave and High Frequency Heating, Bayreuth, Germany, 3-7, September 2001 co-authored with R Ehlers G Georghiou, K Hallac, H Malan and A Papadakis, pp. 165-175, published by Springer Verlag, 2004

‘The use of FE modelling in RF and microwave heating’, Proceedings Heating by Internal Sources (HIS-01) conference, pp. 319-328, University of Padua Italy, September 12-14, 2001

Editor, AMPERE Newsletter, No.30, EUG, CUED, October 2001

‘Implementing the approximate Schur complement preconditioner’, The Journal of the Applied Computational Electromagnetics Society co-authored with H Malan ACES Journal, Vol 16 No. 3, pp.214-217, Nov 2001

Editor, AMPERE Newsletter, No.31, EUG, CUED, December 2001

‘The AMPERE Association and trends in its Biennial Conferences’, Journal of Microwave Power and Electromagnetic Energy, 36, Number 3, pp. 195-198, 2002

‘Numerical Modelling for RF and Microwave Heating Comes of Age’, Journal of Microwave Power and Electromagnetic Energy, 36, Number 3, pp. 241-250, 2002 co-authored with Ehlers, R., Georghiou, G.E., Malan, H,

Editor, AMPERE Newsletter, No.32, EUG, CUED, March 2002

‘Parallel computing in microwave heating analysis’, The Journal of Microwave Power & Electromagnetic Energy, vol36, number 4, pp.215-222, 2002 co-authored with H Malan

‘A new 3D discontinuous sheet for finite element time domain modelling of thin metallic films, COMPUMAG, Bournemouth April 2002,co-authored with R Ehlers

‘Numerical modelling as a design optimisation tool for DNA electrophoresis, COMPUMAG, Bournemouth, April 2002 co-authored with A Srivastana, Georghiou, G., So, P., Matsudaira, P and Ehrlich, D

Editor, AMPERE Newsletter, No.33, EUG, CUED, June 2002

‘3D FE Discontinuous Sheet for Microwave Heating’, IEEE Transactions of Microwave Theory and Techniques, Vol 51, No.3, 718-726, March 2003, co-authored with R Ehlers

‘3D FE Discontinuous Sheet for Microwave Heating’, IEE Proceedings-Science, Measurements and Technology, Special Issue on Computational Electyromagnetics, pp.277-280, September 2002 co-authored with R Ehlers

‘Towards the Simulation of Spark Discharges’, Proceedings of the XIV International Conference on Gas Discharges and their applications, University of Liverpool, Vol 2, pp. 272-275, 2-6 Sept 2002 co-authored with A.Papadakis, and G.E.Georghiou

‘Three Dimensional Algorithm for Gas Discharge Processes’, Proceedings of the XIV International Conference on Gas Discharges and their applications, University of Liverpool, Vol 2, pp. 315-318, 2-6 Sept 2002 co-authored with A.Hallac, and G.E.Georghiou

Editor, AMPERE Newsletter, No.34, EUG, St John’s College, Cambridge, October 2002

Editor, AMPERE Newsletter, No.35, EUG, St John’s College, Cambridge, December 2002

Editor, AMPERE Newsletter, No.36, EUG, St John’s College, Cambridge, March 2003

‘Plasma Production and Control at Atmospheric Pressure Using Dielectric Material’, Proceedings of the 16th International Symposium on Plasma Chemistry, Taormina, Sicily, page 810, June 2003 co-authored with A.Hallac, and G.E.Georghiou

Editor, AMPERE Newsletter, No.37, EUG, St John’s College, Cambridge, June 2003

‘Numerical model for photo-ionisation in three-dimensional calculations’, Proceedings Volume 3, pages 75-76, ICPIG XXVI, (International Conference on Phenomena in Ionized Gases), Greifswald, Germany, July 2003 co-authored with A.Hallac, and G.E.Georghiou

‘The incorporation of heating effects in atmospheric pressuer gas discharges, Proceedings Volume 4pages 65-66, ICPIG XXVI (International Conference on Phenomena in Ionized Gases), Greifswald, Germany, July 2003, co-authored with A Papadakis and GE Georghiou

‘Modelling of RF and Microwave heating using finite Elements’, JMW Glasgow University, 2-4 July 2003  

‘Simulating the development of the spark discharge’, Proceeding of the 9th International conference on Microwave and high frequency heating, University of Loughborough, Sept 2003

coauthored with A Papadakis and GE Georghiou ‘Finite Element time domain analysis of microwave heating applicators using higher order vector finite elements’, Proceeding of the 9th International conference on Microwave and high frequency heating, University of Loughborough, Sept 2003 co-authored with A Hallac

‘Secondary effects in transient non-uniform short-gap corona analysis’, J of Physics D, Applied Physics, 36, pp. 2498-2509, Oct. 2003, co-authored with A.Hallac, and G.E.Georghiou

Editor, AMPERE Newsletter, No.38, EUG, St John’s College, Cambridge, October 2003

‘Finite elements Time Domain Analysis of Microwave Heating Applicators’, IEICE Transactions of Electronics, vol E86-C, No 12. pp.            2357-2364, Japan December 2003.

Editor, AMPERE Newsletter, No.39, EUG, St John’s College, Cambridge, December 2003

Validation of numerical codes for the simulation of microwave heating and associated gas discharge phenomena, Proceedings of The IEE Validation of Computational Electromagnetics Seminar, BAE Systems, Farnborough, 29 March 2004, pp. 27-30, co-authored with G.E. Georghiou, J Bows, D.C. Dibben, R Ehlers

Editor, AMPERE Newsletter, No.40, EUG, St John’s College, Cambridge, March 2003

The Utilisation of Electromagnetic fields in DNA

Microchip Electrophoresis’, Proceedings of the 5th International Conference on Computation in Electromagnetics, April 2004 co-authored with A. Srivastava, G.E Georghiou, P. So, P Matsudaira and D Erlich

A Dual Sheet Method for Active Package modelling in Microwave Heating Systems, FEM04 Workshop, Madrid, May 2004, coauthored with R Ehlers

Editor, AMPERE Newsletter, No.41, EUG, St John’s College, Cambridge, June 2003

Editor, AMPERE Newsletter, No.42, EUG, St John’s College, Cambridge, Oct 2003

Current and future prospects of radio frequency and microwave heating, Proceedings of the International Symposium on Microwave Science and its Application to Related Fields, Takamatsu, Japan, July 27-30, Paper O-P2, pp.5-6, 2004

Numerical Techniques in High Voltage Breakdown, Proceedings MedPow04 International Conference and Exhibition on Power Generation, Transmission and Distribution, Lemesos, Cyprus, Nov 2004 co-athored with A Papadakis and G.E Georghiou

Editor, AMPERE Newsletter, No.43, EUG, St John’s College, Cambridge, December 2004

Simulation for the transition from non-thermal to thermal discharges, Plasma Sources Science and Technology, 14, pp. 250-258, 2005 co-athored with A Papadakis and G.E Georghiou (see below)**

 Editor, AMPERE Newsletter, No.44, EUG, St John’s College, Cambridge, March 2005

Simulation of Sample Injection in Microchip Electrophoresis for DNA Sequencing, Proceedings 5th International Congress on Computational Mechanics, Limassol 29 June- 1 July 2005 co-authored with A. Srivastava, G.E Georghiou, P. So, P Matsudaira and D Erlich

Editor, AMPERE Newsletter, No.45, EUG, St John’s College, Cambridge, June 2005

Numerical modelling of atmospheric pressure gas discharges leading to plasma production, J of Physics D, Applied Physics, Vol 38, pp R303, 2005, co-athored with A Papadakis and G.E Georghiou and R. Morrow (see e-mail below)*

Streamer propagation in long gaps for RF drying applications’, Proceedings of the 10th International conference on Microwave and high frequency heating, University of Modena, Italy, Sept 2005 co-athored with A Papadakis and G.E Georghiou

Numerical modelling of discharges leading to arcing in industrial RF systems, Proceedings of the 10th International conference on Microwave and high frequency heating, University of Modena, Italy, Sept 2005 co-athored with G.E Georghiou

Editor, AMPERE Newsletters, No.46-51, EUG, St John’s College, Cambridge, Oct 2005-Dec 2006

Modelling of Industrial Conveyorized Applicators Using Higher Order Vector Finite Elements JMPEE, vol 40, Number 2, pp 101-108, 2006 co-authored with A Hallac

Editor, AMPERE Newsletter, No.52, EUG, St John’s College, Cambridge, March 2007

Two-dimensional axisymmetric simulations and the heating effects associated with the DC atmospheric pressure discharges during the post streamer stage, Proceedings IET, Science, Measurement & Technology, IET, Volume: 1 Issue: 2, pp.113 – 120, March 2007 co-authored with A. Papadakis, and G.E. Georghiou,

Editor, AMPERE Newsletter, No.53, EUG, St John’s College, Cambridge, June 2007 

An investigation on the effect of varying the load, mesh and simulation parameters in microwave heating applications, JMPEE, vol 40, Number 4, pp 251-259, 2007 co-authored with R Ehlers

Editor, AMPERE Newsletter, No.54, EUG, St John’s College, Cambridge, October 2007

Editor, AMPERE Newsletter, No.55, EUG, St John’s College, Cambridge, January 2008

Editor, AMPERE Newsletter, No.56, EUG, St John’s College, Cambridge, March 2008

Editor, AMPERE Newsletter, No.57, EUG, St John’s College, Cambridge, June 2008

A novel high pressure atmospheric discharge numerical tool utilized in power industry applications", 6th Mediterranean Conference and Exhibition on Power Generation, Transmission, and Distribution (MEDPOWER2008), 2-5 November, Thessaloniki, Greece, 2008, co-authored with A. Papadakis, and G.E. Georghiou

Editor, AMPERE Newsletter, No.58, EUG, St John’s College, Cambridge, October 2008

New high quality adaptive mesh generator utilized in modelling plasma streamer propagation at atmospheric pressures J of Physics D, Applied Physics, Vol 41, no23 234019 (12pp), Cluster issue: streamers, sprites and lightning, 7 December 2008,  co-authored with A. Papadakis, and G.E. Georghiou,  (see e-mail below)***

Editor, AMPERE Newsletter, No.59, EUG, St John’s College, Cambridge, January 2009

Editor, AMPERE Newsletter, No.60, EUG, St John’s College, Cambridge, April 2009

Editor, AMPERE Newsletter, No.61, EUG, St John’s College, Cambridge, June 2009

Editor, AMPERE Newsletter, No.62, EUG, St John’s College, Cambridge, Oct 2009

Editor, AMPERE Newsletter, No 63, EUG, St John’s College, Cambridge, Dec 2009

Editor, AMPERE Newsletter, No 64, EUG, St John’s College, Cambridge, in preparation for publication in March 2010

Feature Extraction of Partial Discharge Signals using the Wavelet Packet Transform and Classification with a Probabilistic Neural Network, IET, Science, Measurement & Technology, co-authored with D. Evagorou et al accepted for publication in the IET Science, Measurement & Technology 2010

Numerical analysis of the heating effects of an atmospheric air barrier discharge, co-authored with A. Papadakis and accepted for publication in WSEAS Proceedings following the meeting in Cambridge scheduled for Feb 2010  

 

 

*E-mail message form the IOP dated Nov 2005 to the authors:
Subject: Your article has been downloaded 500 times!
 
Dear Dr Georghiou,
 
I am pleased to tell you that your article, "Numerical modelling of
atmospheric pressure gas discharges leading to plasma production", in Journal of Physics D: Applied Physics, Vol 38, ppR303 (2005), has been downloaded 500 times so far.
 
This was achieved in 36 days from the date of publication. To put this into context, across all IOP journals 3% of articles were accessed over 500 times this year.
 
You can link directly to your article at:
http://stacks.iop.org/0022-3727/38/R303

 

** -----Original Message-----
From: Caroline Wilkinson [mailto:psst@iop.org]
Sent: Tuesday, April 04, 2006 6:35 PM
To: ap263@eng.cam.ac.uk
Subject: Your article among most popular of 2005
 
Dear Dr Papadakis
 
I am delighted to let you know that your paper 'Simulation for the transition from non-thermal to thermal discharges' was among the 25 most
popular articles downloaded from the Plasma Sources Science and Technology Website in 2005. In fact, your article was downloaded 312 times by your colleagues.
 
A special collection featuring all 25 of the most popular articles in 2005 has been created at http://herald.iop.org/psst/m33/gbr/114934/link/209.
 
All the articles will be free to access until 31 December 2006 and will be actively promoted throughout the year.
 
Thank you for your support of Plasma Sources Science and Technology, we look forward to working with you again soon.
 
With best wishes
 
Caroline Wilkinson
 
-----Original Message-----
From: Sarah Quin [mailto:jphysd@iop.org]
Sent: Thursday, September 10, 2009 2:02 AM
To: eng.ap@frederick.ac.cy
Subject: Your paper in Journal of Physics D
 
Dear Dr Papadakis,
 
I would like to thank you again for contributing to the cluster issue on 'Streamers, Sprites and Lighting' in December 2008 in Journal of Physics D:
Applied Physics. I'm pleased to let you know that your paper, 'New high quality adaptive mesh generator utilized in modelling plasma streamer
propagation at atmospheric pressure' has been downloaded 292 times since it was published online.
.
.
.
Thank you once again for contributing to what is an excellent collection,
and I hope that you will consider J Phys D as a publishing outlet for your
future work.
 
With best wishes,
 
Sarah Quin
Publisher
Journal of Physics D: Applied Physics

 

@AC Metaxas

January 2010