Publications

BOOKS

Chapter 8: Analysis of RF Industrial Heating Systems Using Computational Techniques, Chapter 8, co-authored with Regas Neophytou in a book entitled: Radio Frequency Heating in Food Processing: Principles and Applications, edited by George B.Awuah, Hosahalli Ramaswamy and Juming Tang, Taylor and Francis Group, LLC, CRC Press Dec 2014, Print Book ISBN: 978-1-4398-3704-7, eBook ISBN: 978-1-4398-3705-4

Foundations of Electroheat-A Unified Approach‘, J. Wiley and Sons, 1996

Has been translated into Macedonian and Albanian languages.

Professor D Newland, Head of Dept of Engineering at Cambridge University commented shortly after the book was printed in 1996, “The book outstanding feature is its unified approach to a widerange of seemingly disparate heating topics-absolutely in the best CUED (Cambridge University Engineering Department) tradition”

Industrial Microwave Heating‘ Peter Peregrinus, IEE, 1983 (reprinted 1988 and 1993),

co-authored with R. J. Meredith. This book is being referred to as the BIBLE for scientists and engineers wishing to consider RF or Microwaves in their industrial operations

Both these books can be purchased from Amazon

Microwave Processing of Ceramics’, a Chapter in Advanced Ceramic Processing and Technology,  Noyes Publications, 1991, co-authored with  J. Binner

List of Publications by Dr A C Metaxas and colleagues

Electricity Council Research Centre internal publications (now C-Tech Innovation) Capenhurst Chester UK

1973-1982

  • ECRC/R594 ‘Dielectric Properties of Three Waxes Used in Investment Casting’, April 1973
  • ECRC/M680 ‘Design of a Resonant Cavity as a Heating Device at 2.45 GHz’, December 1973
  • ECRC/M767 ‘Design of a TM010 Resonant Cavity to Process Liquid Foodstuffs at 896 MHz’, September 1974
  • ECRC/M609 ‘Effects of Real and Imaginary parts of the Dielectric constant and Material Size on the Performance of a Microwave Oven” April 1973
  • ECRC/M557 ‘The Complex Dielectric Constant of Moist Paper and Board in the Microwave Region’, July 1973, co-authored with I M Parker
  • ECRC/877 ‘Microwave Dye Fixation (I): Design of Equipment’, December 1976
  • ECRC/921 ‘Design of Equipment for Microwave Sterilisation of Food Particles’, July 1976
  • ECRC/M1055 ‘Electrical Characterisation of Aperture Coupled Resonant Cavities Used in Microwave Heating’, June 1977
  • ECRC/R1123 ‘Microwave Dye Fixation(2): Dye Fixation Tests’, February 1978
  • ECRC/R1184 ‘Microwave Drying of Nylon Tufted Carpets’, October 1978
  • ECRC/R1225 ‘Final Drying of Tufted Carpets Held on a Stenter with Microwaves’, March 1979
  • ECRC/1354 ‘Electrical Methods for Heating/Curing of Carpet Backings’, August 1980
  • ECRC/N1437 ‘Industrial Microwave Heating-The Past, Present and Future Trends’, 1981
  • ECRC/N150 ‘Electrical Techniques In Biotechnology’, October 1981
  • ECRC/N1561 ‘Microwave Applications in the Food Industry’, April 1982

Refereed and Conference Publications

  • ‘The Influence of Metastable Atoms and Molecules on the Re-ignition of High Frequency Discharges’, J. Appl. Phys., 5, pp.1077-1089, 1972, co-authored with J.R.Cozens.
  • ‘Design of a TM010 Resonant Cavity as a Heating Device at  2.45 GHz’, J. Microwave Power, (9)2, pp.123-128, 1974.
  • ‘A Comparison of the Dielectric Properties of Paper and Board at Microwave and Radio Frequencies’, J. Microwave Power, 9(2), pp. 79-89, 1974, co-authored with J. Driscoll.
  • ‘Properties of Materials at Microwave Frequencies’, Transaction of the International Microwave Power Institute, 2, 1974.
  • ‘Design of a Resonant Cavity as a Heating Device at 896 MHz and 2.45 GHz’, Microwave 74 Proceedings, Montreux, September, 1974.
  • ‘Rapid Heating of Liquid Foodstuffs at 896 MHz.’, J. Microwave Power, 11(2), pp.105-115, 1976.
  • ‘Improved Dye Fixation of Carpet Yarns Using a Fundamental Mode Resonant Cavity at 2.45 GHz’,  Proceedings, IMPI Symposium, Leuven, Belgium, 1976, co-authored with D Evans and N Catlow.
  • ‘Microwave Drying of Nylon Tufted Carpets-I Dielectric Properties and Q Measurements’ Proceedings IMPI Conference, Ottawa, June 1978, co-authored with A. Gohel.
  • ‘Microwave Drying of Nylon Tufted Carpets-II Electrical Characterisation of a Modified TE1on Resonant Cavity’, J. Microwave Power,  13(4), pp.315-320, 1978, co-authored with R Meredith.
  • ‘Microwave Assisted Dye Fixation’, J. Microwave Power, 13(4), pp.341-350, 1978, co-authored with D Evans and N Catlow.
  • ‘Microwave Drying of Nylon Tufted Carpets – III Field Trials’, J. Microwave Power,14(4), pp.367-382, 1979, co-authored with I. Holme of Dept. of Textile Industries, Leeds University.
  • ‘Boost Your Shift Production With Microwaves’, Carpet Review Weekly, July 19, p30, 1979, co-authored with R. Meredith. and I. Holme.
  • ‘A Twin TE1on Cavity System for Microwave Drying of Printed Carpets’, IEE-Techniques & Applications of Microwave Power, November 1979.
  • ‘Radio Frequency and Microwave Techniques in the Manufacturing Industry’, Speciality Chemicals,1, pp.27-30, February 1981.
  • ‘The Future of Electrical Techniques in the Production of Printed Tufted Carpets’, J. Microwave Power, 16 (1), pp.43-55, April 1981.
  • ‘Electrical Optimisation of Radio Frequency Applicators’, UPEC, Conference Proceedings, April 1982.
  • ‘A Unified Approach to the Teaching of Electromagnetic Heating of Industrial Materials’, Int. J. Elect. Enging. Educ., 22, pp.101-118, 1985.
  • ‘Network Analysis on Radio Frequency Prototype Industrial Applicators’, J. Micr. Power, 20(4), pp.195-216, 1985.
  • Editor, for a special issue on radio frequency industrial applications published in the Journal of Microwave Power, 22, Number 3, pp. 120-153, 1987.
  • ‘RF and Microwave Energy Hots Up’, IEE Review, pp.185-187, May 1988.
  • Editor, BNCE, Electroheat Education Newsletter, Millbank, London, July 1988.
  • ‘Electricity in Industry-Motive Power to Process Heat’, Energy Efficiency School, Manweb Electricity, Chester , September 1988.
  • ‘Case Study on Drying Involving Electroheat Options’, J.Microwave Power, 23(4), pp.203-210, 1988, co-authored with P L Jones.
  • ‘Radio Frequency and Microwave Heating I. Principles and Practice’, II Industrial Applications, III Case Study, Proceedings Electricity Utilisation Course, Eastern Electricity-JF Consultants, February 1989.
  • Editor, BNCE, Electroheat Education Newsletter, No.11, Millbank, London, April 1989.
  • ‘Heating with Electromagnetic Fields – A Unified Approach’, Electricity Council Teaching Monograph, Elecricity Council, Millbank, London, September 1989.
  • Editor, BNCE, Electroheat Education Newsletter, No.12, Millbank, London, September 1989.
  • ‘Rapid Microwave Feasibility Tests Using a TE1on Cavity”, Proceedings High frequency and microwave processing and heating conference, KEMA/UIE, Arnhem, September 1989; also in Mikrowellen & HF Magazin, 15, No.8, pp.646-647, December 1990.
  • ‘Heating Metallic and Dielectric Slabs by Electric Fields’, Electromagnetic Energy Reviews, 2(4), pp.33-38, 1989.
  • ‘High Frequency/Microwave Conference at Arnhem `89 – A personal Viewpoint’ J. Microwave Power and Electromagnetic Energy, 24 No.4, pp.247-249, 1989.
  • ‘Undergraduate Teaching in Electroheat’, Power Engineering Journal, 4(1), pp. 45-50, January 1990
  • Editor, BNCE, Electroheat Education Newsletter,No.13, Millbank, London, January 1990.
  • ‘Rapid Feasibility Tests Using a TE10n Variable Aperture Resonant Applicator, J. Microwave Power and Electromagnetic Energy, 25(1), pp.3-11, 1990.
  • ‘A versatile Microwave Heating Resonant Cavity: Effects of temperature variation on cavity matching and tuning’, Proceedings of IEE Seminar on Industrial Uses of Microwaves, June 1990 and Conference Proceedings of Industrial Microwave Processing, University of Deakin, Geelong, South Australia, July 1990.
  • ‘Energy Education in the 1990’s’, Proceedings Australian Institute of Energy Conference, Adelaide, July 1990.
  • ‘Introduction to High Frequency Electric Drying Processes’, Proceedings of BNCE Summer School, North Frith, September 1990.
  • ‘Electro-production Know-How’, Proceedings IEE Seminar on Production Efficiency and Profit, East Midlands Electricity Training Centre, Nottingham, November 1990.
  • Editor, BNCE, Electroheat Education Newsletter, No.14, Millbank, London, November 1990.
  • ‘Microwave’, McGraw-Hill Yearbook of Science and Technology, pp. 237-239, 1991.
  • ‘Electroheat Education’, Energy World, No.184, January 1991.
  • ‘Microwave Processing of Ceramics’, a Chapter in Advanced Ceramic Processing and Technology,  Noyes Publications, 1991, co-authored with Dr J. Binner.
  • Editor, BNCE, Electroheat Education Newsletter, No.15, Millbank, London, November 1990.
  • Principles of Microwave Heating, Proceedings of  a  Seminar on microwaves and ceramics, MaMP/TWI, London, April 1991.
  • Editor, BNCE, Electroheat Education Newsletter, No.15, Millbank, London, May 1991.
  • Consolidate, Educate and Ride the Recessional Storm, Guest Editorial, J. Microwave Power and Electromagnetic Energy, 26(3), pp.125-126, 1991.
  • ‘Microwave Heating – a tutorial’, Power Engineering Journal, 5, No.5, pp.237-247, September 1991.
  • Simplified of Microwave Heating Applicators and Heating Cavities, Chapter 5 of a course book, entitled ‘Microwave and high frequency’, Volume I, pp.300-328, as part of the international conference on High frequency and microwave processing and heating, Nice, 8-10 October 1991.
  • Microwave Heating of Substrate Catalyst Material, Proceedings High frequency and microwave processing and heating conference, Nice, 8-10 October 1991, co-authored with N Collings and T Ma.
  • Editor, BNCE, Electroheat Education Newsletter, No.16, Millbank, London, December 1991.
  • ‘Electroheat and the Ionised state’,  a tutorial’, IEE, Power Engineering Journal, (6) No.3, pp.139-147, 1992.
  • Editor, BNCE, Electroheat Education Newsletter, No.17, Millbank, London, September 1992.
  • ‘A laboratory Heat Pump’, BNCE Proceedings of Summer School on Heat Pumps: theory and application, Whittington Hall, Midlands Training Centre, September 1992.
  • ‘A Mathematical Derivation of the Power Penetration Depth for thin Lossy Materials’, J. Microwave Power and Electromagnetic Energy, 27, No.4, pp.217-222, 1992, co-authored with W. Fu.
  • Editor, BNCE, Electroheat Education Newsletter, No.18, Millbank, London, February 1993.
  • ‘Coupling and Matching of Radio Frequency Industrial Applicators’, a tutorial’, IEE, Power Engineering Journal, (7) No.2, April issue, pp.85-93, 1993, co-authored with M C Clee.
  • ‘Applicators for Industrial Microwave Processing’, American Ceramics Ceramics Conference on Microwaves: Theory and applications in Materials processing III, Ceramic Transactions, 36, pp.549-562, 18-22 April, Cincinnati, Ohio, 1993.
  • ‘MAXEMOL – A Numerical Scheme for the Solution of Maxwell’s Equations using the Method of Lines’,  Proceedings,  Fourth International Conference on Microwave and High Frequency, Goteborg, Sweden, 28-30 September (1993), co-authored with W B Fu.
  • ‘Localised Overheating and High Frequency Arcing in Latex Foams’, Proceedings, Fourth International Conference on Microwave and High Frequency, Goteborg, Sweden, 28-30 September (1993), co-authored with M C Clee.
  • ‘Stability Criteria for MAXEMOL – A Numerical Scheme for Maxwell’s Equations Using the Method of Lines’, Proceedings, Fourth International Workshop on Discrete Time Domain Modelling of Electromagnetic Fields and Networks, Berlin,  Germany,  28-30 October (1993), co-authored with W B Fu.
  • Editor, AMPERE, Newsletter, No.1, EUG, CUED, January 1994.
  • Editor, BNCE, Electroheat Education Newsletter, No.19, Millbank, London, February 1994.
  • ‘Numerical Models for the Sintering of Ceramics in a Multi-Mode Cavity’, Proceedings, Symposium on Microwave Processing of Materials, Materials Research Society, San Francisco, USA, 4-6 April 1994, co-authored with W B Fu and D C Dibben.
  • Overview of the EUG Activities at the University of Cambridge, in Microwave Processing of Materials IV, Mat. Res. Soc. Symp. Proc. 347, pp.19-30, 1994.
  • Numerical Prediction of Three-Dimensional Temperature Distributions Inside a Microwave Oven Using the Method of Lines, Proceedings, International Conference on Computation in Electromagnetics, Nottingham University, UK, 12-14 April 1994, co-authored with W B Fu.
  • Experimental Verification of a Finite Element Solution to Heating Problems in a Multi-Mode Cavity, Proceedings,  International Conference on Computation in Electromagnetics,  Nottingham University, UK, 12-14 April 1994, co-authored with D C Dibben.
  • Editor, AMPERE, Newsletter, EUG, CUED, No.2, May 1994.
  • ‘Finite Element Analysis of Multimode Cavities With Coupled Electrical and Thermal Fields’, Proceedings IMPI  Symposium, Chicago, August, 1994, co-authored with D Dibben.
  • ‘Numerical Prediction of Three-Dimensional Power Density Distributions in a Multi-Mode Cavity’, Journal of Microwave Power and Electromagnetic Energy, 29(2), pp.67-75, 1994, co-authored with W B Fu.
  • ‘An Investigation Into Radio Frequency Arcing in Latex Foams’, Journal of Microwave Power and Electromagnetic Energy,29(2), pp.94-100, 1994, co-authored with M C Clee.
  • Editor, AMPERE Newsletter, No.3, EUG, CUED, October 1994.
  • ‘Radio Frequency and Microwave Processing of Wastes’, IEE Colloquium, November 1994.
  • ‘Finite Element Time Domain Analysis of Multimode Applicators Using Edge Elements’, Journal of Microwave Power and Electromagnetic Energy, 29(4), pp.242-251, 1994, co-authored with D C Dibben.
  • A Novel Arc Detecting and Suppressing System for Radio Frequency Applicators, J. Microwave Power, and Electromagnetic Energy  30(2), pp.71-80, 1995, co-authored with M C Clee.
  • Editor, AMPERE Newsletter, EUG, CUED, No.4, January 1995.
  • Radio Frequency and Microwave Heating Applicators and Their Use in Industry, Proceedings of Microwave Processing of Polymers Conference, organised by the American Chemical Society at Anaheim, Los Angeles, April 1995.
  • Editor, AMPERE Newsletter, No.5, EUG, CUED, April 1995.
  • ‘On the Time Domain Finite Element Analysis of Multimode Microwave Applicators’, Proceedings of Compumag 95 Conference, Berlin,July 10-13,  1995, co-authored with D C Dibben.
  • Editor, AMPERE Newsletter, No.6, EUG, CUED, September 1995.
  • ‘Time Domain Finite Element Analysis of Multimode Microwave Applicators Loded with Low and High Loss Materials’, Proceedings Fifth Microwave and High Frequency Heating conference, St John’s College, Cambridge, pp. A3.1-A3.4, September 1995, co-authored with D C Dibben.
  • ‘Modelling of RF Heating’, Proceedings Fifth Microwave and High Frequency Hetaing conference, St John’s College, Cambridge, pp. S3.1-S3.4, September 1995, co-authored with R I Neophytou.
  • A combined Radio Frequency and Heat Pump Drying System, Proceedings Fifth Microwave and High Frequency Heating conference, St John’s College, Cambridge, pp. L3.1-L3.4, September 1995, co-authored with M Marshall.
  • ‘Numerical Solution of Maxwell’s Equation in three Dimensions Using the Method of Lines with Applications to Microwave Heating in a Multi-Mode Cavity’, International Journal Of Applied Electromagnetics and Mechanics, 6(3) pp.165-186, November 1995, co-authored with W B Fu.
  • Editor, AMPERE Newsletter, No.7, EUG, CUED, January 1996.
  • A Comparison of the Errors Obtained with Whitney and Linear Edge Elements’, Proceedings Seventh Bienniel IEEE Conference on Electromagnetic Field Computation, Okayama, Japan, March 18-20, 1996, page 100, co-authored with D C Dibben.
  • ‘Frequency Domain vs Time Domain Finite Element Methods for Calculation of the Fields in Multimode Cavities’, Proceedings Seventh Bienniel IEEE Conference on Electromagnetic Field Computation, Okayama, Japan, March 18-20, 1996, p.322, co-authored with D C Dibben.
  • Editor, AMPERE Newsletter, No.8, EUG, CUED, May 1996.
  • ‘Time Domain Finite Element Analysis of Multimode Microwave Applicators’, IEEE Transactions on Magnetics, 32(3), pp.942-945, May 1996, co-authored with D C Dibben.
  • The Teaching Fellowship Scheme in British Universities, Proceedings UIE conference Birmingham, June 1996, co-authored with T N Oliver.
  • Editor, AMPERE Newsletter, No.9, EUG, CUED, July 1996.
  • ‘Analysing Loaded Cavities Using the FETD Method’, Proceedings RMIT conference Melbourne July 8-10, 1996, co-authored with D H Malan and D C Dibben.
  • ‘Electrical Circuit Modelling for a Radio Frequency Heating/Drying Sytsem’, Proceedings RMIT conference, Melbourne, South Australia, July 8-10, 1996, co-authored with R Neophytou.
  • Editor, AMPERE Newsletter, No.10, EUG, CUED, October 1996.
  • ‘The Potential for Microwave Heating in the Food Industry’, Proceedings, Microwave Association Conference, Dorking, October 3-4, 1996.
  • ‘The Art of Crystal Ball Gazing’, Editorial in International Microwave Power Institutes’s Waveguide Newsletter, pp. 1-2, October 1996.
  • ‘Computer Simulation of a Radio Frequency Industrial System’, Journal of Microwave Power and Electromagnetic Energy, 31(4), pp. 251-259, 1996, co-authored with R I Neophytou.
  • Editor, AMPERE Newsletter, No.11, EUG, CUED, December 1996.
  • ‘Recent Developments in Radio Frequency Technology, Proceedings of First World Congress of Microwave Processing, Microwaves: Theory and Application in Materials Processing IV, Ceramic Transactions 80, Walt Disney Village, Florida, pp.269-276, January 1997.
  • ‘Electrical Circuit Simulation for rf Heating Systems’, Proceedings of First World Congress of Microwave Processing, Abstracts Book, pp. 97-98, Walt Disney Village, Florida, January 1997, co-authored with R Neophytou.
  • ‘Finite Element Modelling of Radio Frequency Applicators, Proceedings of First World Congress of Microwave Processing, Abstracts Book, p. 111-113, Walt Disney Village, Florida, January 1997, co-authored with R I Neophytou.
  • ‘On the Analysis of Multimode Cavities Using the FETD Method’, Proceedings of First World Congress of Microwave Processing, Abstracts Book, p.133-135, Walt Disney Village, Florida, January 1997, co-authored with D H Malan and D C Dibben.
  • Editor, AMPERE Newsletter, No.12, EUG, CUED, March 1997.
  • ‘A Comparison of the Errors Obtained with Whitney and Linear Edge Elements’, IEEE Transactions of Magnetics, 33,No 2, pp. 1524-1527, March 1997, co-authored with D C Dibben.
  • ‘Frequency Domain vs Time Domain Finite Element Methods for Calculation of the Fields in Multimode Cavities’, IEEE Transactions of Magnetics, 33, No.2, pp. 1468-1471, March 1997, co-authored with D C Dibben.
  • Simulation of Microwave Heating Using Finite Elements, IEE Colloquium on High Frequency Simulation in Practice, Savoy Place, May 18, 1997.
  • Editor, AMPERE Newsletter, No.13, EUG, CUED, June 1997.
  • ‘Characterisation of Radio Frequency Heating Systems in Industry Using a Network Analyser’, IEE Proceedings, Sci. Meas. Technol. 144, No.5, pp.215-222, September 1997, co-authored with R I Neophytou.
  • Computer Simulation and Experimental Validation of Phased Controlled Microwave Heating”, Proceedings of Microwave and High Frequency Heating 1997 AMPERE conference, Fermo, Italy, pp.23-26, September 1997, co-authored with J R Bows, M L Patrick and D C Dibben.
  • ‘Domain Decomposition with Electromagnetic Finite Element Analysis’, Proceedings of Microwave and High Frequency Heating 1997 AMPERE conference, Fermo, Italy, pp.27-30 September 1997, co-authored with H Malan.
  • 3D FE Combined Tank and Applicator circuit Model,Proceedings of Microwave and High Frequency Heating 1997 AMPERE conference, Fermo, Italy, pp. 429-432, September 1997, co-authored R I Neophytou.
  • Editor, AMPERE Newsletter, No.14, EUG, CUED, September 1997.
  • AMPERE Conference Draped in History, Waveguide, ISMI, 9, No.3, pp1-2, November 1997.
  • Editor, AMPERE Newsletter, No.15, EUG, CUED, December 1997.
  • Editor, AMPERE Newsletter, No.16, EUG, CUED, March 1998.
  • ‘An Improved FE-FCT method for the Solution of coupled Field in Gas Discharge Problems’, Dicusion meeting on “Coupled Problems”, IEE, Savoy, 7 May 1998, co-authored with G Georghiou and R Morrow.
  • ‘On the Unification of Electroheat as an Academic discipline’, Proceedings of the 6th International Conference on Optimisation of Electrical and Electronic Equipments, Brasov, May 14-15, pp. 107-110, 1998
  • ‘Short-Gap Breakdown of Needkle point Gaps in Air Using Finite Element and Finite Differences Methods’, Proceedings of the 11th Symposium of Elementary Processes and Chemical Reactions in Low Temperature plasmas, pp. 65-70, Slovakia, 22-26 June 1998, co-authored with G Georghiou and R Morrow.
  • ‘Combined Eigenvalue and Circuit Modelling of radio frequency Heating System’, Abstract in Proceedings of Progress In Electromagnetics Research Symposium 13-27 July Nantes France, session MO6 p.462, 1998,  co-authored with R I Neophytou
  • ‘Domain Decomposition with finite Elements for microwave Heating’, Abstract in Proceedings of Progress In Electromagnetics Research Symposium 13-27 July Nantes France, session CO5 p.601, 1998, co-authored with H Malan
  • ‘Improved FE-FCT Method for the Solution of Gas Discharge Problems’, Abstract in Proceedings of Progress In Electromagnetics Research Symposium 13-27 July Nantes France, session DO7 p.885, 1998, co-authored with G Georghiou and R Morrow
  • Editor, AMPERE Newsletter, No.17, EUG, CUED, July 1998.
  • ‘A novel radio frequency assisted heat pump dryer’, Proceedings of the 11th International Drying Symposium (IDS’98), Halkidiki, Greece August 19-22, vol C, pp. 1967-1974, co-authored with MG Marshall.
  • ‘Improved Finite Element Flux Corrected Transport(FE-FCT) Method for Gas Discharge Problems. Application to short needle Point-Plane Gaps’, Proceeding of HAKONEY (VI) International Symposium of High Pressure Low temperature Plasma Chemistry, pp.128-132, Ireland, 31 August to 2 September 1998 co-authored with G Georghiou and R Morrow.
  • ‘Domain Decomposition and Parallel Processing in Microwave Applicator Design’, Proceedings of 11 Conference on Domain Decomposition, University of Greenwich, July 1998, co-authored with H Malan
  • “Radio Frequency and Microwave drying: A Review’, Proceedings of the International Conference on Microwave Chemistry, Prague, pp. 107-110, September 6-11, 1998.
  • ‘Modeling of the Radio Frequency Electric Field Strength Developed during the RF Assisted Heat Pump Drying of Particulates’, Journal of Microwave Power and Electromagnetic Energy, 33(3), pp. 167-177, 1998, co-authored with M.G.Marshall.
  • ‘Combined 3D FE and Circuit Modelling for Radio Frequency Heating Systems’, Journal of Microwave Power and Electromagnetic Energy, 33 Number 4, pp. 243-262, 1998, co-authored with R I Neophytou.
  • Editor, AMPERE Newsletter, No.19, EUG, CUED, January 1999.
  • ‘An improved Finite Element-Flux Corrected Transport Algorithm’, Journal of Computational Physics, 148,pp.605-620, 1999, co-authored with G Georghiou and R Morrow
  • ‘Radio Frequency Assisted Heat Pump Drying of Crushed Brick’, Applied Thermal Engineering, 19, pp. 375-388, 1999 co-authored with M G Marshall.
  • ‘The theory of Short-Gap Breakdown of Needle Point-Plane Gaps in Air Using Finite Difference and Finite Element Methods’, Journal Physics D: Applied Physics, Vol 32, pp.1370-1385, 1999,  co-authored with G Georghiou and R Morrow.
  • ‘Investigation of the Harmonic Generation in Conventional Radio Frequency Heating Systems’, Journal of Microwave Power and Electromagnetic Energy, 34 Number 2, pp.84-96, 1999 co-authored with R I Neophytou.
  • Editor, AMPERE Newsletter, No.20, EUG, CUED, April 1999.
  • ‘Characterisation of corona in air at radio frequency using the FE-FCT method’, Journal Physics D: Applied Physics, 32, pp. 2204-2218, co-authored with G E Georghiou and R Morrow.
  • Editor, AMPERE Newsletter, No.21, EUG, CUED, July 1999.
  • Modelling of Microwave Applicators by the use of a Fully Explicit Whitney Element Time Domain Scheme’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with A Hallac.
  • FE Eigenvalue Simulation of Radio Frequency Heating Systems’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with R I Neophytou.
  • ‘Domain Decomposition Preconditioning for Finite Element Microwave Heating’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with D H Malan.
  • ‘Inclusion of Wall Losses in the Numerical Simulation of Microwave Heating Problems’, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with R H Ehlers.
  • The Pre-breakdown Characterisation of RF Systems Using Finite Elements, Proceedings of the Seventh International Conference on Microwave and High Frequency Heating, Valencia, Spain, 14-17 September 1999, co-authored with G E Georghiou.
  • Editor, AMPERE Newsletter, No.22, EUG, CUED, October 1999.
  • ‘Microwave Phase Controlled Heating’ International Journal of Food Science and Technology, 34, 295-304, 1999 co-authored with J R Bows, M L Patrick, R Janes and D Dibben.
  • ‘A Novel Radio Frequency Assisted Heat Pump Drier’, Drying Technology Journal, 17 (7&8), pp 1571-1578, 1999, co-authored M G Marshall.
  • Combined Tank and Applicator Design of Radio Frequency Heating Systems’, co-authored with R I Neophytou, IEE Proceedings,Microwaves, Antennas and Propagation, 146, no 5, pp.311-318, Oct 1999
  • ‘Switch Mode Power Supply for Microwave Heating Based on the Boucherot Effect’, Journal of Microwave Power and Electromagnetic Energy, 34 Number 4, pp. 206-215, 1999, co-authored with G Georghiou, R Meredith and D Gurwicz.
  • ‘Two dimensional simulation of streamers using the FE-FCT algorithm’,
  • Journal Physics D: Applied Physics, 33 number 3, pp.L27-L32, 2000,  co-authored with G Georghiou and R Morrow.
  • The simulation of the coronal development in air at radio frequency: the effect of attachment secondary emission and diffusion, IEE Proc. Science Measurements and Technology, 147 number 2,pp. 65-73, co-authored with G E Georghiou and R Morrow.
  • ‘Implementing a finite element time domain program in parallel’, IEEE  Antennas and Propagation Magazine, vol 42, number 1, Feb2000, co-authored with H Malan
  • Editor, AMPERE Newsletter, No 23, January 2000.
  • Editor, AMPERE Newsletter, No 24, April 2000
  • ‘Determination of Resonant Modes of RF Heating Systems using Eigenvalue Analysis’, Journal of Microwave Power and Electromagnetic Energy, 35 Number 1, pp.3-14, 2000 co-authored with R I Neophytou
  • ‘Radio frequency and microwave heating; a perspective for the millennium,  Power Engineering Journal, 14 No. 2 , April issue, pp.51-60, 2000.
  • Editor, AMPERE Newsletter, No.24, EUG, CUED, April 2000, on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.25, EUG, CUED, July 2000, on line at www.ampereeurope.org
  • Two-Dimensional Simulation od Electron Avalanches and Streamers in Air Using the FE-FCT Method, Proceedings of International Conference on Gas Discharges and their applications, Glasgow, UK, 3-8 September 2000 co-authored with Georghiou, G. E.,  Morrow, R.
  • Editor, AMPERE Newsletter, No.26, EUG, CUED, Oct 2000, on line at www.ampereeurope.org
  • ‘Simulation of RF coronas using the FE-FCT method’, submitted to the Journal of Microwave Power and Electromagnetic Energy, 35 Number 2, pp.151-164, 2000, co-authored with G E Georghiou.
  • ‘The Effect of Wall Losses in the Numerical Simulation of Microwave Heating Problems’, Journal of Microwave Power and Electromagnetic Energy, 35 Number 4,
  • pp. 199-215, 2000 co-authored with R H Ehlers and D C Dibben.
  • A Two Dimensional Finite Element – Flux Corrected Transport Algorithm for the Solution of Gas Discharge Problems, J.Phys.D; Applied Phys, 33, 2000 pp. 2453-2466 co-authored with Georghiou, G. E., Morrow, R.
  • Editor, AMPERE Newsletter, No.27, EUG, CUED, Jan  2001, on line at www.ampereeurope.org
  • ‘Designing dielectric heating equipment using numerical techniques’, Metalurgia, 68 No.4, pp.24-28, April, 2001
  • Editor, AMPERE Newsletter, No.28, EUG, CUED, April 2001, on line at www.ampereeurope.org
  • ‘Application of the Resistive sheet in Finite Element Microwave Heating Systems, Journal of Microwave Power and Electromagnetic Energy, 36 Number 2, pp.77-87, co-authored with Ehlers, R.
  • ‘The Effect of Photoemission on the Streamer Development and Propagation in Short Uniform Gaps’, J.Phys.D; Applied Phys, 34, pp.200-208, 2001 co-authored with G Georghiou and R Morrow
  • Editor, AMPERE Newsletter, No.29, EUG, CUED, June 2001, on line at www.ampereeurope.org
  • ‘Towards a Fully Three-Dimensional Model for Gas Dicsharges on Unstructured Grids, Using the FE-FCT Method, Proceedings of the ICGD conference, Nagoya, Japan, July 2001 co-authored with K Hallac and G Georghiou
  • ‘FE modelling for microwave and RF heating’. Proceedings PIERS Conference, p. 34, Cosmosquare International Education and Training, Osaka, July 18-21, Japan
  • ‘Finite Element Modelling of Thin Films For Microwave Heating’, Proceedings of the Eight International Conference on Microwave and High Frequency Heating, Bayreuth, Germany, 3-7, September 2001 co-authored with R Ehlers
  • ‘Higher Order Vector Finite Elements for Tetrahedral Cell and Applications to Microwave Heating, Proceedings of the Eight International Conference on Microwave and High Frequency Heating, Bayreuth, Germany, 3-7, September 2001 co-authored with K Hallac
  • ‘Finite Elements in the Simulation of Dielectric Heating Systems’, Proceedings of the Eight International Conference on Microwave and High Frequency Heating, Bayreuth, Germany, 3-7, September 2001 co-authored with R Ehlers G Georghiou, K Hallac, H Malan and A Papadakis, pp. 165-175, published by Springer Verlag, 2004
  • ‘The use of FE modelling in RF and microwave heating’, Proceedings Heating by Internal Sources (HIS-01) conference, pp. 319-328, University of Padua Italy, September 12-14, 2001
  • Editor, AMPERE Newsletter, No.30, EUG, CUED, October 2001, on line at www.ampereeurope.org
  • ‘Implementing the approximate Schur complement preconditioner’, The Journal of the Applied Computational Electromagnetics Society co-authored with H Malan ACES Journal, Vol 16 No. 3, pp.214-217, Nov 2001
  • Editor, AMPERE Newsletter, No.31, EUG, CUED, December 2001, on line at www.ampereeurope.org
  • ‘The AMPERE Association and trends in its Biennial Conferences’, Journal of Microwave Power and Electromagnetic Energy, 36, Number 3, pp. 195-198, 2002
  • ‘Numerical Modelling for RF and Microwave Heating Comes of Age’, Journal of Microwave Power and Electromagnetic Energy, 36, Number 3, pp. 241-250, 2002 co-authored with Ehlers, R., Georghiou, G.E., Malan, H,
  • Editor, AMPERE Newsletter, No.32, EUG, CUED, March 2002, on line at www.ampereeurope.org
  • ‘Parallel computing in microwave heating analysis’, The Journal of Microwave Power & Electromagnetic Energy, vol36, number 4, pp.215-222, 2002 co-authored with H Malan
  • ‘A new 3D discontinuous sheet for finite element time domain modelling of thin metallic films, COMPUMAG, Bournemouth April 2002,co-authored with R Ehlers
  • ‘Numerical modelling as a design optimisation tool for DNA electrophoresis, COMPUMAG, Bournemouth, April 2002 co-authored with A Srivastana, Georghiou, G., So, P., Matsudaira, P and Ehrlich, D
  • Editor, AMPERE Newsletter, No.33, EUG, CUED, June 2002, on line at www.ampereeurope.org
  • ‘3D FE Discontinuous Sheet for Microwave Heating’, IEEE Transactions of Microwave Theory and Techniques, Vol 51, No.3, 718-726, March 2003, co-authored with R Ehlers
  • ‘3D FE Discontinuous Sheet for Microwave Heating’, IEE Proceedings-Science, Measurements and Technology, Special Issue on Computational Electyromagnetics, pp.277-280, September 2002 co-authored with R Ehlers
  • ‘Towards the Simulation of Spark Discharges’, Proceedings of the XIV International Conference on Gas Discharges and their applications, University of Liverpool, Vol 2, pp. 272-275, 2-6 Sept 2002 co-authored with A.Papadakis, and G.E.Georghiou
  • ‘Three Dimensional Algorithm for Gas Discharge Processes’, Proceedings of the XIV International Conference on Gas Discharges and their applications, University of Liverpool, Vol 2, pp. 315-318, 2-6 Sept 2002 co-authored with A.Hallac, and G.E.Georghiou
  • Editor, AMPERE Newsletter, No.34, EUG, St John’s College, Cambridge, October 2002, on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.35, EUG, St John’s College, Cambridge, December 2002, on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.36, EUG, St John’s College, Cambridge, March 2003, on line at www.ampereeurope.org
  • ‘Plasma Production and Control at Atmospheric Pressure Using Dielectric Material’, Proceedings of the 16th International Symposium on Plasma Chemistry, Taormina, Sicily, page 810, June 2003 co-authored with A.Hallac, and G.E.Georghiou
  • Editor, AMPERE Newsletter, No.37, EUG, St John’s College, Cambridge, June 2003, on line at www.ampereeurope.org
  • ‘Numerical model for photo-ionisation in three-dimensional calculations’, Proceedings Volume 3, pages 75-76, ICPIG XXVI, (International Conference on Phenomena in Ionized Gases), Greifswald, Germany, July 2003 co-authored with A.Hallac, and G.E.Georghiou
  • ‘The incorporation of heating effects in atmospheric pressuer gas discharges, Proceedings Volume 4pages 65-66, ICPIG XXVI (International Conference on Phenomena in Ionized Gases), Greifswald, Germany, July 2003, co-authored with A Papadakis and GE Georghiou
  • ‘Modelling of RF and Microwave heating using finite Elements’, JMW Glasgow University, 2-4 July 2003
  • ‘Simulating the development of the spark discharge’, Proceeding of the 9th International conference on Microwave and high frequency heating, University of Loughborough, Sept 2003 coauthored with A Papadakis and GE Georghiou ‘Finite Element time domain analysis of microwave heating applicators using higher order vector finite elements’, Proceeding of the 9th International conference on Microwave and high frequency heating, University of Loughborough, Sept 2003 co-authored with A Hallac
  • Secondary emission effects on streamer branching in transient non-uniform short-gap discharges, in Journal of Physics D: Applied Physics, Vol 36, pp2498 (2003) co-authored with and G.E.Georghiou*
  • ‘Secondary effects in transient non-uniform short-gap corona analysis’, J of Physics D, Applied Physics, 36, pp. 2498-2509, Oct. 2003, co-authored with A.Hallac, and G.E.Georghiou
  • Editor, AMPERE Newsletter, No.38, EUG, St John’s College, Cambridge, October 2003, on line at www.ampereeurope.org
  • ‘Finite elements Time Domain Analysis of Microwave Heating Applicators’, IEICE Transactions of Electronics, vol E86-C, No 12. pp. 2357-2364, Japan December 2003.
  • Editor, AMPERE Newsletter, No.39, EUG, St John’s College, Cambridge, December 2003, on line at www.ampereeurope.org
  • Validation of numerical codes for the simulation of microwave heating and associated gas discharge phenomena, Proceedings of The IEE Validation of Computational Electromagnetics Seminar, BAE Systems, Farnborough, 29 March 2004, pp. 27-30, co-authored with G.E. Georghiou, J Bows, D.C. Dibben, R Ehlers
  • Editor, AMPERE Newsletter, No.40, EUG, St John’s College, Cambridge, March 2003
  • The Utilisation of Electromagnetic fields in DNA Microchip Electrophoresis’, Proceedings of the 5th International Conference on Computation in Electromagnetics, April 2004 co-authored with A. Srivastava, G.E Georghiou, P. So, P Matsudaira and D Erlich
  • A Dual Sheet Method for Active Package modelling in Microwave Heating Systems, FEM04 Workshop, Madrid, May 2004, coauthored with R Ehlers
  • Editor, AMPERE Newsletter, No.41, EUG, St John’s College, Cambridge, June 2003, on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.42, EUG, St John’s College, Cambridge, Oct 2003, on line at www.ampereeurope.org
  • Current and future prospects of radio frequency and microwave heating, Proceedings of the International Symposium on Microwave Science and its Application to Related Fields, Takamatsu, Japan, July 27-30, Paper O-P2, pp.5-6, 2004
  • Numerical Techniques in High Voltage Breakdown, Proceedings MedPow04 International Conference and Exhibition on Power Generation, Transmission and Distribution, Lemesos, Cyprus, Nov 2004 co-athored with A Papadakis and G.E Georghiou
  • Editor, AMPERE Newsletter, No.43, EUG, St John’s College, Cambridge, December 2004, on line at www.ampereeurope.org
  • Simulation for the transition from non-thermal to thermal discharges, Plasma Sources Science and Technology, 14, pp. 250-258, 2005 co-athored with A Papadakis and G.E Georghiou (see below)**
  • Editor, AMPERE Newsletter, No.44, EUG, St John’s College, Cambridge, March 2005, on line at www.ampereeurope.org
  • Simulation of Sample Injection in Microchip Electrophoresis for DNA Sequencing, Proceedings 5thInternational Congress on Computational Mechanics, Limassol 29 June- 1 July 2005 co-authored with A. Srivastava, G.E Georghiou, P. So, P Matsudaira and D Erlich
  • Editor, AMPERE Newsletter, No.45, EUG, St John’s College, Cambridge, June 2005, on line at www.ampereeurope.org
  • Numerical modelling of atmospheric pressure gas discharges leading to plasma production, J of Physics D, Applied Physics, Vol 38, pp R303, 2005, co-athored with A Papadakis and G.E Georghiou and R. Morrow (see e-mail below)***
  • Streamer propagation in long gaps for RF drying applications’, Proceedings of the 10th International conference on Microwave and high frequency heating, University of Modena, Italy, Sept 2005 co-athored with A Papadakis and G.E Georghiou
  • Numerical modelling of discharges leading to arcing in industrial RF systems, Proceedings of the 10th International conference on Microwave and high frequency heating, University of Modena, Italy, Sept 2005 co-athored with G.E Georghiou
  • Editor, AMPERE Newsletters, No.46-51, EUG, St John’s College, Cambridge, Oct 2005-Dec 2006, on line at www.ampereeurope.org
  • Modelling of Industrial Conveyorized Applicators Using Higher Order Vector Finite Elements JMPEE, vol 40, Number 2, pp 101-108, 2006 co-authored with A Hallac
  • Editor, AMPERE Newsletter, No.52, EUG, St John’s College, Cambridge, March 2007, on line at www.ampereeurope.org
  • Two-dimensional axisymmetric simulations and the heating effects associated with the DC atmospheric pressure discharges during the post streamer stage, Proceedings IET, Science, Measurement & Technology, IET, Volume: 1 Issue: 2, pp.113 – 120, March 2007 co-authored with A. Papadakis, and G.E. Georghiou,
  • Editor, AMPERE Newsletter, No.53, EUG, St John’s College, Cambridge, June 2007, on line at www.ampereeurope.org
  • An investigation on the effect of varying the load, mesh and simulation parameters in microwave heating applications, JMPEE, vol 40, Number 4, pp 251-259, 2007 co-authored with R Ehlers
  • Editor, AMPERE Newsletter, No.54, EUG, St John’s College, Cambridge, October 2007 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.55, EUG, St John’s College, Cambridge, January 2008 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.56, EUG, St John’s College, Cambridge, March 2008 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.57, EUG, St John’s College, Cambridge, June 2008 on line at www.ampereeurope.org
  • A novel high pressure atmospheric discharge numerical tool  utilized in power industry applications”, 6th Mediterranean Conference and Exhibition on Power Generation, Transmission, and Distribution (MEDPOWER2008),  2-5 November, Thessaloniki, Greece, 2008, co-authored with A. Papadakis, and G.E. Georghiou
  • Editor, AMPERE Newsletter, No.58, EUG, St John’s College, Cambridge, October 2008 on line at www.ampereeurope.org
  • New high quality adaptive mesh generator utilized in modelling plasma streamer propagation at atmospheric pressures J of Physics D, Applied Physics, Vol 41, no23 234019 (12pp), Cluster issue: streamers, sprites and lightning, 7 December 2008,  co-authored with A. Papadakis, and G.E. Georghiou,  (see e-mail below)****
  • Editor, AMPERE Newsletter, No.59, EUG, St John’s College, Cambridge, January 2009 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.60, EUG, St John’s College, Cambridge, April 2009 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.61, EUG, St John’s College, Cambridge, June 2009 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.62, EUG, St John’s College, Cambridge, Oct 2009 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 63, EUG, St John’s College, Cambridge, Dec 2009 on line at www.ampereeurope.org
  • Feature extraction of partial discharge signals using wavelet packet transform and classification with a probabilistic neural network, IET Science Measurement and Technology, 4(3), 177-192, 1SSN 171 8822 2010, co-authored with Evagorou, D., Kyprianou, A., Stavrou, A., Efthymiou, V., Lewin, P.l., Georghiou, G.E
  • Numerical analysis of the heating effects of an atmospheric air barrier discharge, co-authored with A. Papadakis and accepted for publication in WSEAS Proceedings following the meeting in Cambridge in Feb 2010
  • Editor, AMPERE Newsletter, No.64, EUG, St John’s College, Cambridge, March 2010 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No.65, EUG, St John’s College, Cambridge, June 2010 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 66, EUG, St John’s College, Cambridge, October 2010 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 67, EUG, St John’s College, Cambridge, December 2010 on line at www.ampereeurope.org
  • Three dimensional numerical modelling of gas discharges at atmospheric pressure incorporating photoionisation phenomena, J of Physics D: Applied Physics, 44(4), 2011 and co-authored with Papagerghiou L., and Georghiou, G.E., (see e-mail below)*****
  • Optimum mesh dependent diffusion coefficient proof from high to low order upwind schemes utilised in plasma discharges, co-authored with A. Papadakis, WSEAS Proceedings following the meeting in Cambridge during 20-22 Feb 2011
  • Editor, AMPERE Newsletter, No 68, EUG, St John’s College, Cambridge, March 2011, on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 69, EUG, St John’s College, Cambridge, 2011 on line at www.ampereeurope.org
  • Three dimensional streamer modeling in atmospheric pressure air, IEEE Transactions of Plasma Science, Special Issue on Images of Plasma Science, Volume 39, No.11, Nov 2011, 2224-2225, co-authored with L. Papagerghiou and G. E. Georghiou
  • Editor, AMPERE Newsletter, No 70, EUG, St John’s College, Cambridge, October 2011 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 71, EUG, St John’s College, Cambridge, December 2011 on line at www.ampereeurope.org
  • Microplasmas: A Review, The Open Applied Physics Journal, 4 , pp 45-63, 2011 and co-authored with A Papadakis and S Rossides
  • Editor, AMPERE Newsletter, No 72, EUG, St John’s College, Cambridge, March 2012 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 73, EUG, St John’s College, Cambridge, June 2012 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 74, EUG, St John’s College, Cambridge, September 2012 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 75, EUG, St John’s College, Cambridge, December 2012 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 76, EUG, St John’s College, Cambridge, March 2013 on line at www.ampereeurope.org
  • Editor, AMPERE Newsletter, No 77, EUG, St John’s College, Cambridge, June 2013 on line at www.ampereeurope.org
  • Numerical modelling of gas discharges at 3D: initial validation with the view to studying arcing in RF systems, co-authored with L Papageorghiou and G Geoghiou, 2GCMEA, Long Beach, July 2012. Proceedings of the 2nd Global World Congress. Editors R.L Schulz and D.C. Folz, Long Beach, USA, July 2012 ISBN-10:0978622219 
  • Editor, AMPERE Newsletter, No 78, St John’s College, Cambridge, October 2013 on line at www.ampereeurope.org
  • Analysis of RF industrial heating systems using computational techniques, Chapter in a book entitled: Radio frequency heating in food processing: Principles and applications, edited by George B.Awuah, Hosahalli Ramaswamy and Juming Tang, Taylor and Francis Group, LLC, CRC Press Dec 2014, Print Book ISBN: 978-1-4398-3704-7, eBook ISBN: 978-1-4398-3705-4

*Date: 30 Oct 2003 22:40:03 -0000 From: [email protected]: [email protected] Subject: Your article has been downloaded 100 times! Dear Dr Georghiou, I am pleased to tell you that your article, Secondary emission effects on streamer branching in transient non-uniform short-gap discharges, in Journal of Physics D: Applied Physics, Vol 36, pp2498 (2003), has been downloaded 100 times so far. This was achieved in 29 days from the date of publication

You can link directly to your article at: http://stacks.iop.org/0022-3727/36/2498 I would like to thank you for supporting Journal of Physics D: Applied Physics and I trust that you have found our publication process to be friendly and efficient. I hope you will consider submitting further papers to the journal and encourage your colleagues to do likewise. We look forward to working with you again. If you have any queries about the journal, please don’t hesitate to contact me. If you would prefer not to receive further updates on the number of times this article has been downloaded, please reply to this emailwith the word remove in the subject line. Kind regards Nicola Gulley Senior Publisher Journal of Physics D: Applied Physics Institute of Physics Publishing Dirac House, Temple Back, Bristol BS1 6BE, England Tel: +44 (0) 117 929 7481 Fax: +44 (0) 117 929 4318 [email protected]

 

** —–Original Message—–From: Caroline Wilkinson [mailto:[email protected] Sent: Tuesday, April 04, 2006 6:35 PM To: [email protected] Subject: Your article among most popular of 2005

Dear Dr Papadakis, I am delighted to let you know that your paper ‘Simulation for the transition from non-thermal to thermal discharges‘ was among the 25 most popular articles downloaded from the Plasma Sources Science and Technology Website in 2005. In fact, your article was downloaded 312 times by your colleagues.

A special collection featuring all 25 of the most popular articles in 2005 has been created at http://herald.iop.org/psst/m33/gbr/114934/link/209. All the articles will be free to access until 31 December 2006 and will be actively promoted throughout the year. Thank you for your support of Plasma Sources Science and Technology, we look forward to working with you again soon. With best wishes Caroline Wilkinson

***E-mail message form the IOP dated Nov 2005 to the authors: Subject: Your article has been downloaded 500 times!

Dear Dr Georghiou, am pleased to tell you that your article, “Numerical modelling of atmospheric pressure gas discharges leading to plasma production“, in Journal of Physics D: Applied  Physics, Vol 38, ppR303 (2005), has been downloaded 500 times  so far. This was achieved in 36 days from the date of publication. To put this into context, across all IOP journals 3% of articles were accessed over 500 times this year. You can link directly to your article at:

****—–Original Message—–From: Sarah Quin [mailto:[email protected]] Sent: Thursday, September 10, 2009 2:02 AM To: [email protected] Subject: Your paper in Journal of Physics

Dear Dr Papadakis, I would like to thank you again for contributing to the cluster issue on ‘Streamers, Sprites and Lighting’ in December 2008 in Journal of Physics D: Applied Physics. I’m pleased to let you know that your paper, ‘New high quality adaptive mesh generator utilized in modelling plasma streamer propagation at atmospheric pressure’ has been downloaded 292 times since it was published online.. Thank you once again for contributing to what is an excellent collection, and I hope that you will consider J Phys D as a publishing outlet for your future work.The paper can be downloaded at: http://iopscience.iop.org/0022-3727/41/23/234019/With best wishes, Sarah Quin Publisher Journal of Physics D: Applied Physics

***** From:  <[email protected]> Date: Wed, Mar 30, 2011 at 11:43 PM Subject: Your article has been downloaded 250 times! To: [email protected]

Dear Dr Papageorghiou, I am pleased to tell you that your article, “Three-dimensional numerical modelling of gas discharges at atmospheric pressure incorporating photoionization phenomena”, in Journal of Physics D: Applied Physics, Vol 44, pp045203 (2011), has been downloaded 250 times so far. To put this into context, across all IOP journals 10% of articles were accessed over 250 times this quarter. You can link directly to your article at: http://stacks.iop.org/0022-3727/44/045203 I would like to thank you for supporting Journal of Physics D: Applied Physics and I trust that you have found our publication process to be friendly and efficient. I hope you will consider submitting further papers to the journal and encourage your colleagues to do likewise.Our publication times are highly competitive and we use a fullyelectronic editorial process from submission to peer review toproduction. Electronic submission to IOP Publishing can be done verysimply at the following web page: http://atom.iop.org/atom/usermgmt.nsf/EGWebSubmissionWelcome We look forward to working with you again. If you have any queries about the journal, please don’t hesitate to contact me.If you would prefer not to receive further updates on the number of times this article has been downloaded, please reply to this email with the word remove in the subject line. Kind regards Sarah Quin Publisher Journal of Physics D: Applied Physics IOP Publishing Dirac House, Temple Back, Bristol BS1 6BE, England Tel: +44 (0) 117 929 7481 Fax: +44 (0) 117 929 4318 [email protected]

@AC Metaxas

September 2013